Car keeps dying!
#1
Car keeps dying!
I installed a stillen cai, drove it around for a few minutes after the install and everything was fine. I then did the overnight ecu reset. The next morning I was driving it a little hard and it dies. Just thought it was weird but kept driving. It still does it though, only after driving relatively hard (above 4k with accelerator floored) and then pressing in the clutch. If I don't drive like this, it doesn't do it. Please help!
#4
Registered User
iTrader: (4)
Join Date: Aug 2005
Location: Los Angeles, Cali
Posts: 877
Likes: 0
Received 0 Likes
on
0 Posts
This happens a lot. Do you have a AT or MT? Probably have a 5AT because this happened to me. You might of damaged your MAF Sensor. Put back all your stock intake internals and take it to the dealer. They will be able to see if its the sensor or not. Don't tell them you changed out the intake though.
Your idle drops and engine will shut off, right.
If you did a search on the forum, you would of found all the info you needed.
Hope this helps. Good luck.
Your idle drops and engine will shut off, right.
If you did a search on the forum, you would of found all the info you needed.
Hope this helps. Good luck.
#6
#7
Trending Topics
#11
Thread
Thread Starter
Forum
Replies
Last Post
Thaaa_king
Engine, Drivetrain & Forced-Induction
0
07-18-2015 05:56 PM