my "service engin soon" light is on , I dont know why? Does anyone has the same problem with me. I checked the connection and everything, it all connected very well, any clue???

 

Unknown, mine never did that after install. Maybe reset your ECU?


Black/Willow 03.5 6MT, Premium, Navi, Aero, SAT
350Z Nismo CAI

 

if you left the battery plugged in while you did the install, and unplugged the MAF while the battery was plugged in, I believe this will trip the light.

 

I have the Injen waiting to be installed once the weather gets nicer. How many people have had the "check engine light" or other repercussions occur after installation? I was hoping for a bolt on and drive away. If its going to be a big problem I'll send it back.

2003 BLK/BLK 6-spd Injen clear corners

 

It was a direct bolt on, on my sedan. I have had no problems at all. I love the injen cai, its my favorite mod so far, and it sounds bad-A$$. To fix your problem, just do the ecu reset and that should take care of it.

High Point NC
04 G35 6MT Sedan, Diamond Graphite on Black.
Arrived on 10/20/03
Mods include.
20% tint
INJEN CAI, black
clear bra
clear corners

Rip 2002 Altima 2.5s blk/grey 5/30/02-10/7/03

 

I can state with pretty good (95%) certaintly that you dd not disconnect the battery before unplugging the MAF, or you accidentally started the car with the MAF unplugged (less likely).

Gurgen.

 

I believe I've read other posts on the topic, which is why I disconnected the negative terminal when I installed my CAI. Thankfully, I haven't had any problems w/ the service light at all. Not sure how to resolve your problem tho, sorry. Good luck.

- NICNoobie

2003.0 AT Brilliant Silver Sedan
Premium Package\Graphite Leather\Signaling Clear Corners\AEM Intake (w/ Bypass Valve)

"Why are you my English not being understanding?"

 

I didn't disco the battery when I did mine; no problem with the dummy lights at all.


Black/Willow 03.5 6MT, Premium, Navi, Aero, SAT
350Z Nismo CAI

 

I set mine off after puttin the MAF on backwards. after a fix and an easy ECU reset it was fine. Search on here how to do it. it takes a good 30 seconds

 

I've unplugged my MAF Sensor with the battery connected at least a 10 times (twice yesterday) and never triggered the "service engine soon" display. I did forget to reconnect it once and immediately brought in display when I started the engine.


DaveO
2003 G35 Sedan - DP / Willow / AT / Premium / Sport
350Z Engine Cover, T-Stat & Air Duct / Stillen CAI
GG 7-Wire H-G Kit / TS ECU / E-Fans
Street Edge TC / B&M Cooler / Stillen Exhaust