1st gen sedan dual exhaust complete.
#16
#18
Registered User
iTrader: (4)
Originally Posted by ttrank
Thanks
Not enough. They are fighting for their life back there. 275/30's are all I can fit. My fronts have ~75% left after and my rears are down to ~20% and I don't even do burn-outs!
Not enough. They are fighting for their life back there. 275/30's are all I can fit. My fronts have ~75% left after and my rears are down to ~20% and I don't even do burn-outs!
No way?
What offset are you running?
I have a 35mm offset using 275/30/20.. i have enough room to go with 285's and a bit of space of clearence.
#19
That is excellent work. The dump pipes look like they came out beautifully. If you wanted to be "dirty" you could have dumped into the atomosphere.
The borla exhaust on the auction block now?
How much of a pain was it to route the pass side exhaust and hang the muffler with the canister there? Did you relocate it?
Did you just cut the rear lip to accommodate the muffler tip on the pass side?
The borla exhaust on the auction block now?
How much of a pain was it to route the pass side exhaust and hang the muffler with the canister there? Did you relocate it?
Did you just cut the rear lip to accommodate the muffler tip on the pass side?
#20
Originally Posted by ttrank
I also did a 3.3vlsd swap so my around-town driving is at lower rpm now.
Im loving the exhaust, but can you take a few more rear-end and side view pics? Im not sure if its the angle of the pic, but the left muffler looks just a hair lower?
#21
#22
#26