***PICTURE UPDATED MAY02,08***
VERY EASY INSTALLATION, ONLY DRILL ONE HOLE FROM THE INSIDE~ AND DONE~.~


the purpose of this thread is for xo2 owner who willing to spend a little money and get their tip turn out little bit nicer~.....

not to discussing whether or not to get the xo2 exhaust~~ thank you

i bought these tips on ebay, yes again EBay....wahahha, they are made by Topspeed~ looks very nice and high quality, very nice welding

i will try to post more picture after the installation~ but remember, before ur purchase, be sure that they are named as **100% Titanium**(more expensive) , not the **Titanium look**(less expensive) which look almost the same as the xo2 stock tip~....

they also have other sizes, 4 inch and 4.5 inch, for Xo2 owner should get 4.5 inch...so remember to pick the right one~~

here is the one i bought: http://cgi.ebay.ca/Universal-115MM-4-5-Slide-on-100-GeniuneTitanium-Tip_W0QQitemZ300207770450QQihZ020QQcategoryZ33630QQtcZphotoQQcmdZViewItemQQ_trksidZp1742.m153.l1262
here is the one that cheaper which they call **Titanium look**:
http://cgi.ebay.ca/Universal-115MM-4-5-Slide-on-Titanium-Look-Tip_W0QQitemZ280209560000QQihZ018QQcategoryZ33630QQtcZphotoQQcmdZViewItemQQ_trksidZp1742.m153.l1262

 

wow, that's a fantastic deal!

hell, i might even buy some for my HKS in case I ever scratch my tips on an incline.

good find!

 

DEFINITELY gotta get these, but will you just drill holes in them to put'em on?

 

yeah they r very nice indeed, however, there is a bad thing which i dind't mention yet, is they got bunch of holes at the bottom of the tips~ i think 5 holes in 4.75 inch length i willl take some picture, hold on~

that's why im still thinking should i fill the hole or just leave it=.=., i did asked them before purchase, they said they are pre drilled by topspeed~. nth we can do about it...

here is the picture

 

could these go on the OEM exhaust?

 

not bad at all

 

nice! but im guessing you see the holes if you look inside the exhaust which is rare. so are you drilling holes in the side and replacing your xo2 tips with these?

edit: also how does the length compare? do you mind taking some side by side pics of the old/new tips? thanks.

 

i will try to do that when i do the install, but they are little bit shorter
they said they are angled so the short side is 4inch, the long side is 4.75inch,

 

i would like to know too

 

i guess u can put it on top of the oem tip, but it will look weird tho=.=...since they are a lot bigger than stock tip~...or i doubt they could fit by just drill a hole and fit nicely

 

This is the best find. I was going to create new tips for my XO2 but this is such a great deal it wouldn't even be worth it, even with the holes on the bottom (you can't see them anyways)!

Great find!

 

Nice find

 

anyone know how big the tip is for invidia g200?

 

i hope some one tries it one OEM exhaust. I would get em if it worked right

edit: maybe the 4" ones will fit?

 

Why don't you go measure your stock exhaust tips...?