Megan Racing long tube headers?
Joined: Apr 2007
Posts: 8,664
Likes: 221
From: five oh two
They just came in today! I posted pics here https://g35driver.com/forums/picture...-has-come.html
2) I own a few sets of tools and did it at the shop on base so I had full access to any tool I could need. Most bolts are a 14mm, there are a couple 12mm, 10mm and 2 8mm. o2 sensors are 7/8. You can do it with a good socket/ratchet set. Ratchet wrenches help but are not necessary. A 3/8 breaker bar will come in handy as well. Other than that you should be good.
3) no sounds clips, I will try to get some this weekend.
Joined: Apr 2007
Posts: 8,664
Likes: 221
From: five oh two
1)65k
2) I own a few sets of tools and did it at the shop on base so I had full access to any tool I could need. Most bolts are a 14mm, there are a couple 12mm, 10mm and 2 8mm. o2 sensors are 7/8. You can do it with a good socket/ratchet set. Ratchet wrenches help but are not necessary. A 3/8 breaker bar will come in handy as well. Other than that you should be good.
3) no sounds clips, I will try to get some this weekend.
2) I own a few sets of tools and did it at the shop on base so I had full access to any tool I could need. Most bolts are a 14mm, there are a couple 12mm, 10mm and 2 8mm. o2 sensors are 7/8. You can do it with a good socket/ratchet set. Ratchet wrenches help but are not necessary. A 3/8 breaker bar will come in handy as well. Other than that you should be good.
3) no sounds clips, I will try to get some this weekend.
Thanks for the reply, looking forward to your sound clip!
Joined: Apr 2007
Posts: 8,664
Likes: 221
From: five oh two
1)65k
2) I own a few sets of tools and did it at the shop on base so I had full access to any tool I could need. Most bolts are a 14mm, there are a couple 12mm, 10mm and 2 8mm. o2 sensors are 7/8. You can do it with a good socket/ratchet set. Ratchet wrenches help but are not necessary. A 3/8 breaker bar will come in handy as well. Other than that you should be good.
3) no sounds clips, I will try to get some this weekend.
2) I own a few sets of tools and did it at the shop on base so I had full access to any tool I could need. Most bolts are a 14mm, there are a couple 12mm, 10mm and 2 8mm. o2 sensors are 7/8. You can do it with a good socket/ratchet set. Ratchet wrenches help but are not necessary. A 3/8 breaker bar will come in handy as well. Other than that you should be good.
3) no sounds clips, I will try to get some this weekend.
Joined: Apr 2007
Posts: 8,664
Likes: 221
From: five oh two
No baseline, im going to start on monday!
I'll be out of town monday I wish that I could help you out. If you can make some sound clips or vids of your exhaust before you install the headers.
Joined: Apr 2007
Posts: 8,664
Likes: 221
From: five oh two
Trust me, ill make some nice clips!
If they perform this would be so huge for Megan. You cant beat that price, i saw them for $325 shipped! on hopupracing dot com even after you get them coated they'll still be half the price of the competition. Race headers combined with a tune will usually net huge gains however you really should do a baseline though to check the power band. Many headers have a negative effect on low end power. A baseline, header, header+tune dyno would be the best. I would ask Megan to sponsor the dynos since you're the first I know of to pioneer their headers in this market + if they perform they'll have many new customers.
Heres the soundclip of mine
<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/QGd6ykVViJQ&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/QGd6ykVViJQ&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>
<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/QGd6ykVViJQ&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/QGd6ykVViJQ&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>



