X-pipe and dual exhaust on Sedan
Joined: Oct 2002
Posts: 2,474
Likes: 11
From: Vero Beach, FL
X-pipe and dual exhaust on Sedan
Has anyone tried doing this to a sedan yet? It look like there is plenty of room. You'd just have to cut out an opening for another exhaust tip.
I bet it'd have a really racy sound to it.
BTW, is it true that the 20 HP difference between the coupe and sedan is mainly in the exhaust system?
I bet it'd have a really racy sound to it.
BTW, is it true that the 20 HP difference between the coupe and sedan is mainly in the exhaust system?
Registered User
Joined: Jan 2003
Posts: 2,085
Likes: 0
From: San Jose,CA
Re: X-pipe and dual exhaust on Sedan
It would have been nice if we could have gotten all that from the beginning.
03.5 Sedan/B. Silver/Prem/Winter/Aero/Tint/Rims
69 Chevelle Hard Top BB/4.11's/Posi
03.5 Sedan/B. Silver/Prem/Winter/Aero/Tint/Rims
69 Chevelle Hard Top BB/4.11's/Posi
Registered User
Joined: Jan 2003
Posts: 5,946
Likes: 1
From: San Diego, CA
Re: X-pipe and dual exhaust on Sedan
Would be nice. I'd actually like to see an exhaust for the sedan that looks like the 04 Maxima's... twin tips on both sides, with two variable-capacity mufflers to keep it quiet at idle and prevent the low-end torque drop.
2003.5 G35 Sedan Desert Platinum/Graphite Premium/Sport/Aero/Nav/Winter
2003.5 G35 Sedan Desert Platinum/Graphite Premium/Sport/Aero/Nav/Winter
Guest
Posts: n/a
Re: X-pipe and dual exhaust on Sedan
Not enough to make it worth it...To get 20 hp at the top end you'd have to make all the mods ryoken mentioned....alot of $ for 20hp. Honing the intake alone may not make any difference at all without the other mods.
G35s 6MT Garnet Fire, Premium, Aero, Aero Body Kit, Winter Sport
G35s 6MT Garnet Fire, Premium, Aero, Aero Body Kit, Winter Sport
Trending Topics
Joined: Oct 2002
Posts: 2,474
Likes: 11
From: Vero Beach, FL
Re: X-pipe and dual exhaust on Sedan
I think I may be wrong! I don't know if you could get the true dual exhaust in there. I think the rear sway bar is in the way on the passenger side.
Joined: Oct 2002
Posts: 2,474
Likes: 11
From: Vero Beach, FL
Re: X-pipe and dual exhaust on Sedan
If you could do it, I don't think the price would be too bad.
I have a guy down here in Miami who does custom exhausts (mandrel bends too). Based upon the other custom work he has done for me in the past, I bet it wouldn't be much more than $600 (inlcuding mufflers).
I have a guy down here in Miami who does custom exhausts (mandrel bends too). Based upon the other custom work he has done for me in the past, I bet it wouldn't be much more than $600 (inlcuding mufflers).
Registered User
Joined: Mar 2003
Posts: 45
Likes: 0
From: Vancouver, BC
Re: X-pipe and dual exhaust on Sedan
Hi Quadcam,
You can fit as dual exhaust on there quite easily past that right side sway bar drop. I have had a good look at it and my pipe bending buddy at the shop says a nice easy bend is capable with a 2.5 inch pipe. I asked the same question of the Stillen tech rep who and there new dual system is done under on that side as well with no ground clearance issue at all.
Just thought I would mention it for your info.
Have a good one
Ted
You can fit as dual exhaust on there quite easily past that right side sway bar drop. I have had a good look at it and my pipe bending buddy at the shop says a nice easy bend is capable with a 2.5 inch pipe. I asked the same question of the Stillen tech rep who and there new dual system is done under on that side as well with no ground clearance issue at all.
Just thought I would mention it for your info.
Have a good one
Ted
Thread
Thread Starter
Forum
Replies
Last Post
djreinx
Engine - Electrical
3
Dec 10, 2015 01:48 AM
