I am NOT feeling the power of Mrev!@
There is a method to reset the ECU by doing a sequence of pedal pushes. There is a DIY section on this forum, it should be in there. Just be sure to count slowly (1 mississippi, 2...)
Registered User
Joined: Oct 2005
Posts: 2,381
Likes: 0
From: NY
Ok you have to drive it hard to feel it. First lunch your car from a stop and floor the pedal all the way to 6500rpm and shift fast all the way up to 3rd. If you you don't feel this power then something is wrong with you. Don't try to floor your car while you're at 4th coz you won't feel that much power up top.
I put the mrev2 on my 04 sedan this weekend, and did the pedal reset. I didn't notice much gains at first, but now after a couple of days it pulls stronger past around 5,500rpms. Now I can get a nice tire chirp going into third gear everytime and thats with 275's in the back.
Registered User
iTrader: (19)
Originally Posted by P_Diddy
There is a method to reset the ECU by doing a sequence of pedal pushes. There is a DIY section on this forum, it should be in there. Just be sure to count slowly (1 mississippi, 2...)
I had to do it like 3 times before I got the timming down right. haha!! 
Registered User
Joined: Oct 2005
Posts: 2,381
Likes: 0
From: NY
Originally Posted by Dj Cyntex
Havn't looked up on the MREV, but if it's only giving you 22hp I don't think you'll feel as big as a difference as gaining 22 tq.
Registered User
Joined: Mar 2006
Posts: 362
Likes: 0
Originally Posted by spdzone
I installed the MD 1/2" spacer last sunday. I didn't notice anything at first but maybe around Tuesday night the car felt very different. Like it just came alive all of a sudden. I think the computer needs to adapt to the extra air or something. Someone told me I should've reset the computer but I was also told by someone else that if you drive it around hard a few times the computer will adapt to your driving style. If that makes any sense. Now I can get 2nd gear chirps in my 5AT that's with the VDC on! I couldn't do that before.
Registered User
Joined: Aug 2005
Posts: 140
Likes: 0
From: Sacramento, CA
got mine through everythingG35.com. the one dealership in scottsdale, AZ. took me about 30mins to install. just spacer, I didn't purchase the ISO thingamajiggy.....
Originally Posted by Funner567
where you get ur spacer and was it hard to install?
Thread
Thread Starter
Forum
Replies
Last Post
FS[SoEast]: 2006 DG Coupe Part Out - mrev2, projectors, etc
bu villain
Accessories
63
Aug 25, 2016 07:14 PM