can anyone please lead me to how to reattach these?

 

go get new ones. factory uses double side foam adhesive. no way you are going to make it look anywhere near decent. if you don't care what it looks like, the easiest way is to use glue or silicone adhesive. if you want it to look factory you are going to have to get new emblems.

 

i have brand new ones. now i need to know exactly where to attach them

 

bump for a real answer

 

bump people please help

 

Just measure the location of the emblems on another G in a parking lot or dealership. Alternatively, just wing it. What's the worst that can happen?

 

Just don't put it up side down. There is a pic out there and its not pretty.

 

Fuji emblem should be straighworward-it has holes. Or did you fill them?
Cut guiding pins off the new emblem and stick it in the top-middle of the trunk. That's what I did with "Nissan" emblem-holes don't line up.Came out OK.

Letters-on another G measure distance between left taillight and center of first "I" and distance between right headlight and center of last "I". Measure height from bottom of the trunk lid to the bottom of first(or last "I).

On your car-put masking tape across the trunk so top edge of the tape will be at height you measured(bottom of first or last "I").
Mark on masking tape distance from left and right taillamps(should be the same). Measure distance in between. Divide that distance for 7 parts and make markings on masking tape. These markings are centers of letters.

Stick new letters on along the masking tape, putting first and last letters first at centering them at FIRST and LAST marking
Sorry, cannot help you on how to stick them vertically-you should have good eye and firm hand for that. Idea is to have something like this:

I N F I N I T I
|_|_|_|_|_|_|_|

(It gets all screwed when post is posted)
Practice on flat ground without removing backing first.

 

if you have a coupe i think that all the emblems just stick on....^^^

 

Your new emblems should have come with spacing templates.

 

new emblems came with spacers so i know how the spacing is but i dont' want it crooked. and so on. u know? coupe is jsut stick on there are no holes. if there were i would not have taken the emblems off.

 

they have spacing templates with the new emblems?.. that's pretty helpful lol

 

yes but there isn't a template of the trunk so i can stick on where it's suppose to go exactly. usually body shops knows this with the repair manual. i remember seeing this in my old s2000's repair manual but i can't find anything for a g35

 

Just look at a pic of a stock G.

Take a grease pen, tape measure and a level and make your centering and level marks.

It's not rocket science.....

 

simple dude...take masking tape run it perfectly horizontal. if your worried about how far up/down to attach, simply look at another coupes emblems and see how far from top/bottom/left/right its attached. Once you do that then run a piece of painters tape top/bottom/left/right of where it should go....