Does any Know where to get M3 or M5 Spoiler
Originally Posted by Polishthrust
I think your problem is that it extends over the tail lights, remove the 2 small pieces on each side and u will have a very clean look. I am really starting to dig that look, especially with the diffuser. It looks really clean and simple.
Heres an example.
Heres an example.
Originally Posted by Polishthrust
I think your problem is that it extends over the tail lights, remove the 2 small pieces on each side and u will have a very clean look. I am really starting to dig that look, especially with the diffuser. It looks really clean and simple.
Heres an example.
Heres an example.
+1 from me
Originally Posted by Asad_A203
Yeah, that looks way better than the way I have it. How hard was it to install the diffuser? Would a black diffuser match the Laser red though?
Originally Posted by darnelled
I used the M3 Like kvangil has and am very happy with it. I got it on Ebay for $60 painted to match my OB sedan perfectly and shipped. It is flexible and about 1/2 inch narrower than the trunk edge when lining it up exactly along the edge. I preferred one a little narrower than a little too wide. I'll post a pic later.
<a href="http://photobucket.com" target="_blank"><img src="http://i104.photobucket.com/albums/m183/darnelled/cars/shower005.jpg" border="0" alt="Photo Sharing and Video Hosting at Photobucket"></a>
<a href="http://photobucket.com" target="_blank"><img src="http://i104.photobucket.com/albums/m183/darnelled/cars/shower001.jpg" border="0" alt="Photo Sharing and Video Hosting at Photobucket"></a>
Originally Posted by octupus23
Im about to buy it on ebay. will the titanium silver match? I have the 03 light siler sedan... :S
Registered User
Joined: Jul 2007
Posts: 31
Likes: 0
Originally Posted by darnelled
If you get it from the same ebay seller, you specify which Infiniti paint color you have. My OB matches perfectly. The spoiler is about 1/4" from the edge of the trunk lid on each end, but I'd rather have it too narrow than too wide like some others had.
Thanks
Registered User
Joined: Jul 2007
Posts: 31
Likes: 0
I bought it from this guy..... http://cgi.ebay.com/ebaymotors/INFIN...7256QQtcZphoto
It looks pretty good, just half an inch off from each side, and make sure you give him the paint code...
It looks pretty good, just half an inch off from each side, and make sure you give him the paint code...
Originally Posted by octupus23
I bought it from this guy..... http://cgi.ebay.com/ebaymotors/INFIN...7256QQtcZphoto
It looks pretty good, just half an inch off from each side, and make sure you give him the paint code...
It looks pretty good, just half an inch off from each side, and make sure you give him the paint code...
That's the same one I used too.
Registered User
Joined: Jan 2008
Posts: 31
Likes: 0
From: NorCal
Very nice.....
Very nice,
My lip spoiler came in yesterday and I was wondering how you bent the spoiler to fit correctly around the trunk. Did you heat up the spoiler to bend then put it on the trunk? or did you just slap it on and bend it as you pealed off the tape? Thanks!
My lip spoiler came in yesterday and I was wondering how you bent the spoiler to fit correctly around the trunk. Did you heat up the spoiler to bend then put it on the trunk? or did you just slap it on and bend it as you pealed off the tape? Thanks!
Originally Posted by kvangil
The eBay ones are fine. I'm satisfied with mine. it cost me $60 painted and shipped....
I have the exact same on as well. Do as the instructions. You cut the red tape in the middle and peel off about half an inch both ways so you can peel as you go. Align the middle so now the middle is stuck on the trunk, and start one way peeling and aligning as you go. Then you go the other way peeling and aligning and you're done! I did mine in poor lighting and basically used my thumb to measure when I was aligning it heh! came out perfectly aligned though! good luck!
Registered User
Joined: Jan 2008
Posts: 31
Likes: 0
From: NorCal
Thank you, I'll try. When my spoiler came in, it wasn't bent at all. Basically i have to bend around the edge of the trunk to fit. So its ok to bend the spoiler to fit without heating it to make it softer to bend? Also is the 3m tape strong enough to hold the bend if I proceed to apply it without heating it?
Thanks for the help!
Thanks for the help!
