show your kuruma z bumper!!!

Subscribe
Jan 13, 2011 | 02:49 PM
  #361  
Quote: Well I guess it was not a F*** Up from the shop that installed them... i was thinking they wired it wrong.. somehow and yes, you are correct the fog lights do not function as they should.. you turn the switch and the LED's get brighter. i have to drive with my high beams on since i did not install the main bulbs i did not have the 8000k's i wanted at the time. other then that everything works great.

p.s what do you recommend for the main light i dont want a really dark blue and I'm not very familiar with lights what "k" should i get? 8000?
personally I would stick with either stock 4300k or 6000k.
Reply 0
Jan 20, 2011 | 07:42 PM
  #362  


finally got it
Reply 0
Jan 21, 2011 | 01:15 PM
  #363  
Quote: personally I would stick with either stock 4300k or 6000k.
+1, if you are looking for mostly white light, with some hint of blue go with 6k. The higher it goes the more blueish it gets.
Reply 0
Feb 1, 2011 | 04:54 PM
  #364  
here's a vid!! too!
hey well i have more pics but just want to share a video too!..
Reply 0
May 11, 2011 | 01:46 PM
  #365  
Quote: ^i would say about a quarter of an inch lower then the sport sides, with the splash guards its not all that bad

i get a lot of people on g35 driver saying that side skirts are a must, but in reality a lot of people on the road(even people with exotics) think that i have a full body kit on

we get ours from conceptzperformance.com, they are the only ones who make the kurumaZ, its full polyurethane, and fitment is at WORST 9.5 out of 10(but that is rare)

here are some newer pics i took







Nice man... i have a black G35 too and just got it lowered on Z H-Techs. Now i wanna get a more aggressive front look and thinking about this bumper but i don't really wanna go with side skirts. whats your take on it. do you still not have side skirts? how close are the sport sides and the kuruma bumper sitting? what size rims (not sure if that would make a difference)? and finally, did you get it painted from the supplier or did you paint it locally?

thats all lol, thanks man
Reply 0
May 11, 2011 | 02:51 PM
  #366  
^i say go with skirts

i replaced mine with poly impul sides, makes a hell of a difference in looks, wheels are 20 inch, but i added spacers to make it more aggressive, now its fully flushed, and i had all my parts painted locally,

here are the new pics with impul sides and chargespeed rear
IMG_3284.jpg?t=1305139736

IMG_3294.jpg?t=1305139838

with stock sport sides and front splash guards, it isn't THAT bad, only about 1/4 inch difference in height


Reply 0
May 11, 2011 | 02:52 PM
  #367  
This is so sick
Reply 0
May 12, 2011 | 10:55 AM
  #368  
Quote: ^i say go with skirts

i replaced mine with poly impul sides, makes a hell of a difference in looks, wheels are 20 inch, but i added spacers to make it more aggressive, now its fully flushed, and i had all my parts painted locally,

here are the new pics with impul sides and chargespeed rear




with stock sport sides and front splash guards, it isn't THAT bad, only about 1/4 inch difference in height
Man thats looking REAL nice ... i think when i do it i'm gonna go with the front bumper first and see how it looks. what springs/coilovers are you sitting on? and any pics of the chargespeed rear? and did you get your headlights done since the last pics you posted? they look darker but it can be just the angle and the shadows!
Reply 0
May 12, 2011 | 11:39 AM
  #369  
^im dropped on greddy type-s coilovers

here is a pic of the chargespeed rear, its the poly version
IMG_3281.jpg?t=1305214655

Name:  IMG_3297.jpg
Views: 558
Size:  107.6 KB

and yes i had my headlights painted and tails smoked

Name:  IMG_3288.jpg
Views: 529
Size:  143.6 KB


Reply 0
May 12, 2011 | 01:54 PM
  #370  
looks sweet man... i'm currently on z h-techs (not too low) and i think ima go with the bumper soon and see how it looks once i put it on. I'll then decide on skirts once i see how it looks. cuz i do like your pics from back when you didn't have skirts.

where did you get your headlights done? how much? im debating that too but i like the contrast of the stock tails!

as far as the spacers, how is the performance on those? i heard some horror stories about those man. makes me super scared to get some! i drive my car pretty aggressively every now and then and thinking i might even hit up the track soon!
Reply 0
May 12, 2011 | 02:29 PM
  #371  
^back when i had just the front on, i had the sport sides and oem rear with cf diffuser and rear plash guards too....a lot of people will think that its a full body kit lol

it'll still look good with sports sides, just get a diffuser and splash guards to finish it off

as for headlights, had em done by adon locally, you can do em yourself, not too hard, just be patient and pay close attention to the headlights when you put em in the oven, gotta heat up the sealant to loosen it up

spacers, ran em for over a year, no issues, but i would suggest getting stronger nuts then the ones the spacer comes with, those nuts are soft as hell and round out easily if your not careful

if your thinking of what it would look like from the back with a diffuser and splash guards here is another old pic of mine

Name:  IMG_1213.jpg
Views: 588
Size:  93.4 KB


Reply 0
May 13, 2011 | 08:55 AM
  #372  
Quote: ^back when i had just the front on, i had the sport sides and oem rear with cf diffuser and rear plash guards too....a lot of people will think that its a full body kit lol

it'll still look good with sports sides, just get a diffuser and splash guards to finish it off

as for headlights, had em done by adon locally, you can do em yourself, not too hard, just be patient and pay close attention to the headlights when you put em in the oven, gotta heat up the sealant to loosen it up

spacers, ran em for over a year, no issues, but i would suggest getting stronger nuts then the ones the spacer comes with, those nuts are soft as hell and round out easily if your not careful

if your thinking of what it would look like from the back with a diffuser and splash guards here is another old pic of mine

DUDE, i've been looking EVERYWHERE for a cf rear diffuser and haven't found one yet, where did ya get yours. i already have the oem splash guards so just need the diffuser. I gotta tell ya man, your car looks really clean. I really wanna change my front sport bumper since i couldn't find any lips to go on the front sport bumper. NEED a more aggressive look in the front BAD
Reply 0
May 13, 2011 | 08:55 AM
  #373  
by the way, how come you're not tinted?
Reply 0
May 13, 2011 | 10:34 AM
  #374  
Bought mine from e-bay. Here's how it looked before I got my Chargespeed rear bumper

http://cgi.ebay.com/ebaymotors/03-07...Q5fAccessories

SonsG-14.jpg?t=1305297226

SonsG-20.jpg?t=1305297200


Reply 0
May 13, 2011 | 11:33 AM
  #375  
i got mine from gt-spec, but they stopped selling aero parts so they re-routed aero sales to black top aero

but there are vendors on this forum that sells the diffuser in cf and gloss black

hoagie- are you talking about my tails in the last pic? thats an older pic, if your talking about the windows, in BC you're not allowed to have front tint at all, so i figured if i can't have front tint then no point in only going half way, i don't like the look of tinted rears but non tinted fronts
Reply 0