show your kuruma z bumper!!!
#452
Ever see one on a FX? Here is mine. I did it a bit different by painting the lower piece with black 3M textured undercoating. If I scrape the bottoms, you can't tell or takes a second to mask and spray to touch-up.
For those that don't want to use side skirts too and reduce the raked look, this helps too.
Molded in the mesh, 30% airflow type was used.
For those that don't want to use side skirts too and reduce the raked look, this helps too.
Molded in the mesh, 30% airflow type was used.
#455
Ever see one on a FX? Here is mine. I did it a bit different by painting the lower piece with black 3M textured undercoating. If I scrape the bottoms, you can't tell or takes a second to mask and spray to touch-up.
For those that don't want to use side skirts too and reduce the raked look, this helps too.
Molded in the mesh, 30% airflow type was used.
[]http://i187.photobucket.com/albums/x271/Chedman13/IMG_6736.jpg[/IMG]
For those that don't want to use side skirts too and reduce the raked look, this helps too.
Molded in the mesh, 30% airflow type was used.
[]http://i187.photobucket.com/albums/x271/Chedman13/IMG_6736.jpg[/IMG]
Manual Fx
#458
#459
Who makes the Kuruma for the FX? Or is that a 100% custom job?
You're gonna get a ton of opinions on this one... but my pick is the Impul sides. Not my car, but will be pretty close when i get a chance to put it all together:
And another look in LR:
So I just went through this entire thread as I'm currently looking for a front and sides. Love this bumper, and I will be probably going with it. My question is what do you guys think best matches it sides wise? I have an 07 coupe if that matters ...
Pics if possible please
Pics if possible please
And another look in LR: