Please post some pics of a g35 with the INGS body kit.

First off, welcome to the forum.

There is so much info on here that you shouldn't have to ask. Although you can't search 3 letter words, Ings will give you plenty of results and tons of pics.

https://g35driver.com/forums/search....archid=3611309

haha i like how the first result is this post

Search is your friend...

molded ING's

ING's front and sides

ING's sides stock rear

Front and sides


i didnt find pics with the rear lip but its ugly...

Ings Looks good might be getting the lip soon...

ings cool...try ings front impul sides n stock rear...i think that look hot or nismo front impul/ings sides haha

i think ings front is to low for impul sides

the ings front and impul sides don't flow at all.

since we are on the INGS topic....i have a replica INGS rear deck spoiler........it has no pre drilled holes or anything.........any good ideas on how i can put it on without screws...for example.....using 3m tape all around it or some other type of adhesive???

you could just put 3M Tape on the bottom of the spoiler.. but i guess its a big spoiler... you might want to drill holes

Clean both surfaces VERY VERY well and use 3M tape.. then use silcone and seal the wing to the trunk (yes you'll be able to take it off later) but this keeps crap from getting in there and loosening up the tape..

- Eric
626-636-6678

How low is the INGS lip compared to Nismo? Will I be scraping everywhere?

can't speak for the nismo but I repainted my ings lip once in the past two years. On one hand, the front of the car is pretty low so you really can't see smaller scuffs anyways. OTOH I'm running stock height and I still have to be extra careful on any driveways.

i believe the ing's lip is lower than nismo... i say yes you will scrape alot...