Nismo Bumper Help!
Joined: Mar 2007
Posts: 211
Likes: 0
From: Houston, TX
Nismo Bumper Help!
I just got my car back from the shop last Wednesday and on the way back to work I realized I had a problem!
Basically, the plastic pc that mounted to the lower part of the OEM bumper could not be mounted to my new Nismo bumper cover b/c it wasn't long enough. Apparently this is a common problem and I wanted to get suggestions on how to fix this problem.
Is the support you get from the left and right splash guards enough support for the bumper or should I add additional support?
Any suggestions on how to remedy this problem are appreciated!
Basically, the plastic pc that mounted to the lower part of the OEM bumper could not be mounted to my new Nismo bumper cover b/c it wasn't long enough. Apparently this is a common problem and I wanted to get suggestions on how to fix this problem.
Is the support you get from the left and right splash guards enough support for the bumper or should I add additional support?
Any suggestions on how to remedy this problem are appreciated!
Do a search under my name and you will find a thread I started with Pics on what I did to solve this. In short, my installer made a bracket as suggested. Turned out great and you can't notice anything.
Joined: Mar 2007
Posts: 211
Likes: 0
From: Houston, TX
Calvin, elrooko,
Thanks for the input! Could someone please provide a little more detail on how this bracket is mounted or attached to the bumper. I have a good idea on how to make a bracket; however, i would hate to reinvent the wheel if it has already been invented and works well.
Thanks for the input! Could someone please provide a little more detail on how this bracket is mounted or attached to the bumper. I have a good idea on how to make a bracket; however, i would hate to reinvent the wheel if it has already been invented and works well.
Thread
Thread Starter
Forum
Replies
Last Post





