Prepping and painting nismo repilica
what did you guys pay?
Former G35driver Vendor
iTrader: (93)
Joined: Sep 2004
Posts: 9,524
Likes: 3
From: So. Cali - Rowland Hts
PREP
1. Sand edges and seams completely
2. Wash all surfaces to be painted thoroughly with TSP in warm water and scotcbrite pads
3. Sand surfaces to be painted with 320 wet dry sandpaper - at this point, you should have a dull scratched appearance.
4. Clean surface and all edges with either Dupont 2319S or Sherwin Williams R7K157 or R7K158 or equivalent.
5. Fill all imperfections. if applicable with a flexible putty and sand smooth.
6. Apply adhesion promoter or equivalent Dupont #2322.
7. Note: Some painters prefer, after cleaning the surface, to apply Dupont "Variprime". let dry and scuff with a scothbrite pad and then apply basecoat/clearcoat.
8.Apply basecoat clearcoat following manufacture's recommendations for painting a flexible polyurethane plastic
1. Sand edges and seams completely
2. Wash all surfaces to be painted thoroughly with TSP in warm water and scotcbrite pads
3. Sand surfaces to be painted with 320 wet dry sandpaper - at this point, you should have a dull scratched appearance.
4. Clean surface and all edges with either Dupont 2319S or Sherwin Williams R7K157 or R7K158 or equivalent.
5. Fill all imperfections. if applicable with a flexible putty and sand smooth.
6. Apply adhesion promoter or equivalent Dupont #2322.
7. Note: Some painters prefer, after cleaning the surface, to apply Dupont "Variprime". let dry and scuff with a scothbrite pad and then apply basecoat/clearcoat.
8.Apply basecoat clearcoat following manufacture's recommendations for painting a flexible polyurethane plastic
Thread
Thread Starter
Forum
Replies
Last Post