I have an 05 Coupe with Kuruma Z, and just noticed that my lower front bumper is sagging horribly. On the freeway, if I hit any dip I can hear it scrapping.

I lifted the car up and attempted adjust everything but that didn't work.
Originally thought it was the intercooler causing it but it's not as everything is bolted up ad normal.

Is my lower engine cover causing this? I'd go out and lift everything up again but the 110 degree temps are a bit of a factor.

Pic:

 

Looks like its your undertray pulling it down, i'd just make sure all the bolts are ont he under tray, theres like a metal "frame" that bolts onto the bottom of the motor see if those are off...

 

That must be it. When I checked everything before, the only thing bolted up to anything was the bolts to the bumper. Now I have to order another undertray though as this one is shot from scrapping on everything.

Thanks for the info.

 

drill holes and zip ties

 

yea thats crazy low. Mine doesnt do that.

 

nice ride!

 

lovin the base decals.

 

I had that same problem on my car. I just removed the undertray (or better known as skidplate). From looking at the picture, I get the impression that you are located somewhere with favorable climate (HOT!). If this is the case, and you don't have snow to deal with, then I would suggest removing it, or replacing it.

 

Zip ties FTW.

 

beautiful car!