Bride Cuga Seats, will they fit? G37
#1
Bride Cuga Seats, will they fit? G37
I need to know whoever has experience/knowledge on the BRIDE CUGA CR1AGS RECLINING RACING SEAT and how they will fit in the G37. I dont want them to be bulky and hitting the door. I also need to know if Bride makes a bracket for the G or if I can use another one. I know this is a g35 site but I figure its the same thing. Thanks
Yes they are real bride seats so i need the measurement on the Bride Japan ones not the other cheap crap. Thanks.
http://www.evasivemotorsports.com/Me...ct_Code=CR1AGS
Yes they are real bride seats so i need the measurement on the Bride Japan ones not the other cheap crap. Thanks.
http://www.evasivemotorsports.com/Me...ct_Code=CR1AGS
#2
They can fit, and you should hvae plenty of room in the car for these NOT to hit your door. They fit a Z which is a bit smaller inside.
what I would do is measure your seats now at the shoulder bolster portion, and then look online for the measurements of the Cugas in the same area of the seat, and see how much wider they might be, and if they are, see if you can accomodate them.
Also, you can try contacting LOT USA directly for info on seat brackets for the G37 (CV36)
what I would do is measure your seats now at the shoulder bolster portion, and then look online for the measurements of the Cugas in the same area of the seat, and see how much wider they might be, and if they are, see if you can accomodate them.
Also, you can try contacting LOT USA directly for info on seat brackets for the G37 (CV36)
Thread
Thread Starter
Forum
Replies
Last Post
thewarden
General Tech Questions
0
08-30-2015 04:00 PM