OEM rear lip for an 05?
#2
ill Sedan
iTrader: (87)
By OEM I assume you mean Nismo, they are discontinued and you will likely not find one. There have been 2 of us that have done it, including myself, another guy is working on it right now.
Parts you will need:
1. An 03-04 rear bumper
2. An 03-04 rear lip (Nismo, Stillen, Wald Replica, etc.)
3. 03-04 mudguards, piece right behind the wheel that goes behind the lip. These should not be confused with splash guards which go on top of the bumper. These will make everything line up with the 03-04 bumper and lip without modification. If you don't purchase these then your body shop will have to do some slight modifications to make everything fit. IIRC they are ~$150 from Riverside Infiniti.
Here is the result:
heyitzalex
CandlestickPark
Parts you will need:
1. An 03-04 rear bumper
2. An 03-04 rear lip (Nismo, Stillen, Wald Replica, etc.)
3. 03-04 mudguards, piece right behind the wheel that goes behind the lip. These should not be confused with splash guards which go on top of the bumper. These will make everything line up with the 03-04 bumper and lip without modification. If you don't purchase these then your body shop will have to do some slight modifications to make everything fit. IIRC they are ~$150 from Riverside Infiniti.
Here is the result:
heyitzalex
CandlestickPark
Last edited by CandlestickPark; 03-19-2010 at 09:44 PM.
#3
CandlestickPark aka Marcus did it. send him a PM
https://g35driver.com/forums/media-s...-rear-lip.html
https://g35driver.com/forums/media-s...-rear-lip.html
#6
ill Sedan
iTrader: (87)
#7
Trending Topics
#9
ill Sedan
iTrader: (87)
#10
ill Sedan
iTrader: (87)
Its a direct fit. You'll need the 03-04 mudguards (part behind the wheel that goes under the lip) for everything to line up properly. If you don't get them your body shop can mod it a bit to fit.
Thread
Thread Starter
Forum
Replies
Last Post
yoyoyo8
Exterior - Body Parts
1
08-12-2015 03:04 AM