The G35 coupe I recently bought was debadged. I've purchased the badges (thanks Beshoff) and feel fairly confident putting them on. There's a small outline of the Mt Fuji emblem, so I don't have a problem with that. For the "I N F I N I T I" and "G35" badges, I plan on using a magnetic level and some painter's tape as an underline to make sure they're even.

My question:

I can't see outlines for the "G35" or "I N F I N I T I" badges. Can anyone help me out on the pricise location for these? I'd very much appreciate it

Also, I know most people use double sided tape. I bought an adhesive-like glue for the used Mt. Fuji emblem I got. Do you guys think I'll be ok?

 

The word Infiniti isn't leveled perfectly I believe the outside "I"s are a little more up.

 

N F I N I T is 2" up from the bottom edge of the trunk

Both the I's are 1/8" higher(2.125")

The I's are 4" from the bottom corner of the trunk

The letters have 1.125" between them

I shaved my G35 emblem but Id guess it was 1" down from the trunk line where it goes from top to back and about 3" from the right edge

If youre clever you could find the INFINITI text online and print it to scale. Then cut out the letter roughly on the paper and tape that to the car and place the letter that way, like a template

 

Could you post measurements for the Mt Fuji emblem?
Thanks

 

4.75" x 2.5"