taking off oem grill
#2
Originally Posted by g35sammy
anyone know? i can't seem to get it offf......its stuck or something on the sides......please help~
You will likely need a flashlight to see.
It has a plastic square head.
Use a slot (flat) screw driver & turn about 45 deg & pull at the same time to release.
To reasemble, take the clip off the car & preassemble to the grill, then just push grill into place
#3
#6
#7
Trending Topics
#8
i cant get my grill off either. i'm stuck on the two clips on the sides that are hidden. shouldn't they just pop right out. I dont understand what you guys are saying about the flathead. Please help thanks.
DHCrocks i'm unable to see your pics.
DHCrocks i'm unable to see your pics.
Last edited by chinkstylzz; 12-22-2004 at 04:44 PM.
#9
chinkstylzz, you need to stick a thin headed slotted (flat head) screwdriver into the front of the grill and turn the locking keys, I think about a quarter turn is enough. It looks like a plastic screw but it actually is a square shaped key that locks into the body. it's hard to turn, I would suggest applying a little bit of pressure as you try to turn it so it grabs the slot. At the same time try pulling the grill forward slightly so the key pops out. The pics are at http://pg.photos.yahoo.com/ph/cyohi/.../ph//my_photos
the pics are not specifically of the grill mounting points, but it should give you an idea of how it looks.
the pics are not specifically of the grill mounting points, but it should give you an idea of how it looks.
Last edited by DHCrocks; 12-22-2004 at 07:07 PM.
Thread
Thread Starter
Forum
Replies
Last Post