Hey i was wondering if anybody knows how to take parts of the center console out.

The main part i am talking about it the part around the shifter. If anybody knows how please post here

thanks

 

Put a flat screwdriver in the back (towards armrest) and pry up. There's a little notch there for it. After you get it up a little use your fingers and keep pulling straight up.

 

it might be wise to put a cloth over the screwdriver first too, to protect the easily scratched console

also, you're gonna need to take off the shifter i think... not sure how to do that on a 6MT since i have an auto

 

Well to take off the shifter its real easy on the 6MT. Just use a wrench and twist it to the left (clock wise).

But as for taking it apart. Its easy right? i should be worried to break it?

 

noo should be real easy!

unless u wana take out ur radio and stuff...

Thats a real pain.. Trust me.. taking it apart like what 6-7 times now.. still a BEEP to put it back together!

Ed

 

After you remove the console the first time , the clips get far easier. From then on (6MT) just pull up (with a finger) under the the edge were the leather boot meets the console plastic. I can basically take the console out , with no tools in about 1 minute, now.

 

Don't know if you got what you needed, but here's a link to detailed instructions (with photos) of how to disassemble the dash/center console:

http://g35ipod.com/installHW.php?skin=1