AFTER MARKET sideskirts (Greddy, Stillen)
#1
Join Date: May 2004
Location: Southern California
Posts: 1,006
Likes: 0
Received 0 Likes
on
0 Posts
AFTER MARKET sideskirts (Greddy, Stillen)
HI guys, I was looking at the Greddy side skrits w/ the side vents and I was wondering if I can install JUST that on a fully stock (w/ just the front lip) and rear w/ jsut the splash guards w/o it looking LOWER than the front and rear....
I know most people have the Gracer bumper too at the front so it all goes in a flow line... but I am just curious will it look massively funny?
Thanks
I know most people have the Gracer bumper too at the front so it all goes in a flow line... but I am just curious will it look massively funny?
Thanks
#2
After thinking about it, I think it would look weird. Imagine it from the side view only. It would be high on the front, then suddenly low side, then to the rear splash guard the raises up very quickly to a high point once again. I currently have a greddy front, then Ings sides and rear, this matches just right, and that Greddy front is super low.
So if you just had side skirts it would go up, down, then up on the side view. It's always best if you had everything complete. If you don't want to go that low on the front, I would go either INGs or Datasystem front lip, Greddy side skirt, then either Greddy, INGs, Kenstyle rear.
So if you just had side skirts it would go up, down, then up on the side view. It's always best if you had everything complete. If you don't want to go that low on the front, I would go either INGs or Datasystem front lip, Greddy side skirt, then either Greddy, INGs, Kenstyle rear.
#3
Join Date: May 2004
Location: Southern California
Posts: 1,006
Likes: 0
Received 0 Likes
on
0 Posts
Thanks RaySur for the help
I am curious tho... is the datasystems lip or the INGs lip lower than the OEM lip? Cuz I know the OEM lip doesn't lower the bumper MUCH if anything at all, just brings it out a little... this still isn't enoguh I presume? I am fine w/ teh rear... just the front is my concern since the rear kicks up and the front lies straight along w/ the sideskirts
I am curious tho... is the datasystems lip or the INGs lip lower than the OEM lip? Cuz I know the OEM lip doesn't lower the bumper MUCH if anything at all, just brings it out a little... this still isn't enoguh I presume? I am fine w/ teh rear... just the front is my concern since the rear kicks up and the front lies straight along w/ the sideskirts
Thread
Thread Starter
Forum
Replies
Last Post
THMotorsports
Suspension-Vendor
257
12-18-2018 05:43 PM
edwinisdumb15
SOCAL Meetings & Events
6
03-04-2016 10:45 AM