Interior & Exterior Exterior Modifications ; Interior Modifications ; Lighting ; Gauges and More

Ken Style aero kit

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Mar 17, 2005 | 12:39 PM
  #1  
AxisG35's Avatar
Thread Starter
|
Registered User
Joined: Mar 2005
Posts: 73
Likes: 0
Post Ken Style aero kit

Where do they sell the Ken style aero kit...? I have been looking around and i found two places that sells it but there both over 2 grand and im wondering if i can find it newhere else for cheaper, im just looking for good prices....Thanks guys
 
Reply
Old Mar 17, 2005 | 12:44 PM
  #2  
GXCLUSIV's Avatar
Registered User
Joined: Jun 2004
Posts: 1,348
Likes: 0
From: So.Cal
Your not going to find the original KenStyle kit for under $2900. However a replica of KS might be available soon. Check link below.


https://g35driver.com/forums/showthread.php?t=47582
 
Reply
Old Mar 17, 2005 | 01:20 PM
  #3  
AmistadUSA's Avatar
Registered User
Joined: Dec 2004
Posts: 235
Likes: 0
From: Los Angeles www.CANautoclub.com
Originally Posted by AxisG35
Where do they sell the Ken style aero kit...? I have been looking around and i found two places that sells it but there both over 2 grand and im wondering if i can find it newhere else for cheaper, im just looking for good prices....Thanks guys

$2.9K is already a good price - you are looking for KENSTYLE Be prepare to spend $3.5K including painting and installation UNLESS you wanna go for the replicas
 
Reply
Old Mar 17, 2005 | 02:10 PM
  #4  
Inferno-G's Avatar
Registered User
Joined: Mar 2005
Posts: 15
Likes: 0
From: Sunrise, FL
Is it made out of poly-urethane?
 
Reply
Old Mar 17, 2005 | 02:49 PM
  #5  
AmistadUSA's Avatar
Registered User
Joined: Dec 2004
Posts: 235
Likes: 0
From: Los Angeles www.CANautoclub.com
Originally Posted by Inferno-G
Is it made out of poly-urethane?
No.

Authentic Kenstyle is "A" rated fiberglass - direct fit
 
Reply
Old Mar 17, 2005 | 03:20 PM
  #6  
AxisG35's Avatar
Thread Starter
|
Registered User
Joined: Mar 2005
Posts: 73
Likes: 0
Ok well thanks for the input....i found it for 2400 which is not bad and im willing to pay for that but just thought i would ask the experts before i bought nething, thanks guys, i heard there is an upside to fiberglass cause it can be fixed if it gets messed up and urethane cannot be fixed....if you dent it or break it.
 
Reply
Old Mar 17, 2005 | 03:24 PM
  #7  
GXCLUSIV's Avatar
Registered User
Joined: Jun 2004
Posts: 1,348
Likes: 0
From: So.Cal
Originally Posted by AxisG35
Ok well thanks for the input....i found it for 2400 which is not bad and im willing to pay for that but just thought i would ask the experts before i bought nething, thanks guys, i heard there is an upside to fiberglass cause it can be fixed if it gets messed up and urethane cannot be fixed....if you dent it or break it.
May I ask what shop or site sells it for $2400? Thats a very good price.
 
Reply
Old Mar 17, 2005 | 03:31 PM
  #8  
Inferno-G's Avatar
Registered User
Joined: Mar 2005
Posts: 15
Likes: 0
From: Sunrise, FL
I had bad experiences with fiberglass in the past , I don't think I want to go through that again...

full lip kit for my future G then
 
Reply
Old Mar 17, 2005 | 04:04 PM
  #9  
accordfreak's Avatar
Registered User
iTrader: (14)
Joined: Jun 2003
Posts: 3,226
Likes: 17
Originally Posted by AxisG35
Ok well thanks for the input....i found it for 2400 which is not bad and im willing to pay for that but just thought i would ask the experts before i bought nething, thanks guys, i heard there is an upside to fiberglass cause it can be fixed if it gets messed up and urethane cannot be fixed....if you dent it or break it.

but then it IS MUCH harder to dent or break a urethane kit.

with my old car I ran into curbs, dragged on driveway, bent the urethane kit like it was a piece of toy etc etc and it held up just fine. I just had to sand the damaged areas and repaint it.
 
Reply
Old Mar 17, 2005 | 09:02 PM
  #10  
BulletproofG35's Avatar
Former G35driver Vendor
Joined: Dec 2004
Posts: 517
Likes: 0
From: Los Angeles
The replica won't last. Kenstyle has already registered the copyrights and trademarks in the U.S. to protect their original design.
 

Last edited by BulletproofG35; Mar 17, 2005 at 09:10 PM.
Reply
Old Mar 18, 2005 | 01:33 AM
  #11  
speedy's Avatar
Registered User
Joined: Feb 2005
Posts: 5
Likes: 0
i am actually trying to buy the kenstyle front bumper and side skirts too. How much do you guys think it's going to cost? Do you suggest any shops/websites?
 
Reply
Old Mar 18, 2005 | 12:51 PM
  #12  
AxisG35's Avatar
Thread Starter
|
Registered User
Joined: Mar 2005
Posts: 73
Likes: 0
Well i was looking on some website...cant remember which one said they only sell the full kit that ken style does not offer seperate parts only there full kits. I found the kit yesterday on a website called ngkits.com i think was the website....but i went on again and could not find it....so im not sure whats going on there, i have only found it at once place and i think thats intense motorsports, are there any other websites i could look for it ??
 
Reply
Old Mar 18, 2005 | 03:15 PM
  #13  
GXCLUSIV's Avatar
Registered User
Joined: Jun 2004
Posts: 1,348
Likes: 0
From: So.Cal
Originally Posted by speedy
i am actually trying to buy the kenstyle front bumper and side skirts too. How much do you guys think it's going to cost? Do you suggest any shops/websites?
You can only buy the KS kit complete. Bulletproofautomotive or Intensemotorsports can order for you. Also if you only want the front bumper and side-skirts, there are plenty of guys in the forum that will buy the rear bumper from you.
 
Reply
Old Mar 18, 2005 | 04:47 PM
  #14  
AmistadUSA's Avatar
Registered User
Joined: Dec 2004
Posts: 235
Likes: 0
From: Los Angeles www.CANautoclub.com
Originally Posted by BulletproofG35
The replica won't last. Kenstyle has already registered the copyrights and trademarks in the U.S. to protect their original design.

Excellent to hear that
 
Reply
Old Mar 18, 2005 | 05:04 PM
  #15  
JDM 350GT's Avatar
Registered User
Joined: Mar 2005
Posts: 3,100
Likes: 0
if money isnt the issue; i wouldn't go for replica;
 
Reply


You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 06:03 AM.