I just got pulled over tonight for not having the front license plate displayed. Is there an alternate way of putting it on without drilling holes into my front bumper? I tried searchin in the forum but i couldn't find anything.

 

Try this one. It's kinda pricy at $63.00, but cops will leave you alone. And you can put it on and off anytime. It actually attaches on the tow hook screw.

Pls note: THIS FITS THE 04-05 G35 STOCK FASCIA WITH A 22MM TOW HOOK THREAD DIAMETER ONLY!!!

http://stillen.com/Sportscars_detai...id=62321&page=1

 

This won't work with the Kenstyle front, part of the tow hook is covered by the bumper. I was looking into this as well but was disappointed to see it won't fit.

 

I was able to mount my plate in the lower air vent....but I removed that bar that went across it. Not sure how you setup your bumper but do a search on me & you can see the pics of it. On the other hand you might not like this but another suggetion is doing a evo type setup where the plate is on a mounting bracket which is then mounted on the side of the front bumper..

 

You must have the knock off. Mine came with brackets and holes in the underside.

 

As stated by G352NV, the original KS bumper came with brackets and holes underside. You should be able to drill some holes underside and modify/make couple angled brackets.

 

EXACTLY, same here

 

I got the real Kenstyle...i found the holes..but my bodyshop said they didnt see any license plate bracket.
anyone know if i can purchase it somewhere? maybe even directly from kenstyle?

 

If it's the real Kenstyle, post some pics of the paperwork, the bumper, and pm me where you purchased it. I will speak with the main office regarding it and they should provide you with what you need.

 

2 L- brackets from Home Depot etc. look at the picture from GXCLUSIVE.very easy to make.

 

or you could do that

 

[IMG]C:\Documents and Settings\Tonster\My Documents\My Pictures\2005-10-03\Scan10010.JPG[/IMG]

 

hmmmm not too sure how to post pic