INGS Face Ducts!!! ***Look Here***
#19
Originally Posted by TwoK4drSi
Can you get pics of it with a front lip? Also, how is it attached?
Here are some pictures of it with the complete Ings bodykit, including the Ings front lip. https://g35driver.com/forums/interior-exterior/54366-who-wants-ings-face-ducts.html it lines up perfectly with an oem lip too. I have plenty of pictures of the original ones.
Last edited by Silverbolt; 12-26-2005 at 02:49 AM.
#21
Joined: Aug 2005
Posts: 306
Likes: 0
From: Santa Ana, CA
Originally Posted by G35US
How much for the carbon fiber version with no fog light? Can it be part of the group buy?
As for carbon fiber, I have no information right now. I can't really promise anything, its really hard to say. My manufacturer used to say that we will finish the first product before thanksgiving but in the end it is finished before christmas. It all depends on the manufacturer.
#22
Originally Posted by Silverbolt
Its attatched the same way the original Ings face ducts are mounted, and the same way most flush mount spoilers are mounted too... using a very strong double sided adhesive tape.
Here are some pictures of it with the complete Ings bodykit, including the Ings front lip. https://g35driver.com/forums/showthread.php?t=54366 it lines up perfectly with an oem lip too. I have plenty of pictures of the original ones.
Here are some pictures of it with the complete Ings bodykit, including the Ings front lip. https://g35driver.com/forums/showthread.php?t=54366 it lines up perfectly with an oem lip too. I have plenty of pictures of the original ones.
#23
#24
Originally Posted by TwoK4drSi
Dude, I know what the original ones look like I just want to see if THESE will look the same and a non picture response is NOT enough. Also, just double sided tape.......ewww. Someone can just rip them off.
As for double sided tape. With the right double sided tape, and done correctly, it will be extremely hard to pull off. Spoilers, like the Data System spoiler are attatched using double sided tape... and they stay on the car while even with standing 150 mph speeds! Onces its on.. its staying on.
#29
I JUST GOT MINE! Its real, and its finally happening!!!! I must say, I'm very impressed, and it looks great! The fitment might take a little work... wiggling it around to make it sit flush, but overall, its very snug! Another VERY big plus, is that its made of black fiberglass! That means, if it ever gets any rock chips, scratches or anything like that.. it'll stay black, and wont be polka-dotted with white dots everywhere! The ONLY downside to it is... for anyone that has a molded front lip, you might have to customize your lip a little to fit flush with the face ducts. The bodyshop that installed my lip molded it just a couple mm too high, so I'm going to have to shave the bottom of the face ducts a little. I'll take some pictures of them shortly, to show the quality and detail that was put into these! This thursday, at the local G35 meet, I'll bring them along to take some test fitment shots on a G. This weekend, I'll shave them down and install them, and if I finish, I'll take some final pictures of them on my car. I'm also installing sways on my car... with some other goodies, so I'm going to be busy this weekend, so I might not have enough time to custom fit them for my car for pictures.