DIY Driver Airbag replacement w/PICS
#16
One more thing for this thread - if you get a dash and its a different color, you can paint it prior to installing it using Bulldog vinyl adhesive promotor and then SEM flexible coating paint - the paint, if cured properly, will NEVER come off, and looks like a stock dash.
I used this on a willow dash I painted black, used flat black paint, since the gloss black makes the dash look like hard cheap plastic.
I got my dash for $150, $770+ at the dealer new....plus tax!
Oh, by the way, instead of replacing ur clockspring, you can get the connectors from Gren2k on ebay for about $30:
http://cgi.ebay.com/ebaymotors/2003-...Q5fAccessories
Hope this helps!
I used this on a willow dash I painted black, used flat black paint, since the gloss black makes the dash look like hard cheap plastic.
I got my dash for $150, $770+ at the dealer new....plus tax!
Oh, by the way, instead of replacing ur clockspring, you can get the connectors from Gren2k on ebay for about $30:
http://cgi.ebay.com/ebaymotors/2003-...Q5fAccessories
Hope this helps!
#20
#23
i have a 03 drivers bag thats is burned
and i want to switch the cover off off one that was deployed,which i repaired so its not torn,
my question is ,can i just switch the cover ,with the bag unplugged,or will the non deployed bag fall out and i wont be able to get it back in place to put my repaired cover over it,this will be out of the car when i do the cover swap ,if anyone knows i really want to try this
my question is ,can i just switch the cover ,with the bag unplugged,or will the non deployed bag fall out and i wont be able to get it back in place to put my repaired cover over it,this will be out of the car when i do the cover swap ,if anyone knows i really want to try this
#30
The Vol up button and horn does not work, I have to turn the steering wheel to the right in the right spot and the buttons work.
What do I have to replace?
Inspection is due at the end of the month and need my horn to work again..