HElp guys....like the title~ i can't find any DIY or anything.....im trying to do some customework for my interior.....

is it just pull it out?...

 

basicly, i would get the prying tool from any local tool shop which looks like a 2 prong folk at the end with a screw driver handle =0) u simply place it under the panel you would like to remove and move it around until you find a clip and just pop up carfully, note sometimes you think its going to break but indeed it takes some presure to pop

now on other panels with screws in them, i owuld suggest looking in your manual or online to see where screws are located so your not wasting your time searching for them.. hope this helps

may i ask what panels or interior your trying to remove maybe i can assist more if i knew which ones,

im actualy ripping apart y car today for a full paint job =0) so all windows out and moldings and around door panels/rubbers you get the point, do it the right way

 

all the part with silver~ door handle....the centre....the clock area.....and also want to know how to remove the airbag cover?....and 2 side control

thxthx

 

Silver door pulls pop off
Center takes some more work (03/04), search for double-din install (05/06) is easy.
Clock part pulls out
Airbag is removed by the two bolts on each side. Pop off the little covers and you will see them.

 

Silver panels do pop off but after you pop them off there are two 10mm bolts that need to be removed. Also there is a black tab behind the door handle that you must remove and there is another 10mm screw there also.

The clock area pulls right out and I am not too sure about what size torques you will need for the airbag.

 

how about the 2 control which sit beside the airbag cover....?...the silver one