So I have been working today on installing some party lights in my car b/c I am 19 and that is what I do =P. But when I went to the DIY for removing my center console so that I could hide some of the wires and drill some holes for the wires I find that my center console is diffrent from all the guides even though the guide says it is for and 03-06 and I have an 06. I am guessing I just for sum reason have the 07 center console in my car for sum reason. I cant find a DIY for removing the center console on the 07 (assuming that is what I need) any help. I am saying I have an 07 console based off the fact that I dont have a break between my cupholder and middle armrest holder that was shown in EVERY other DIY. Help would be apprecitated VERY much

 

i guess pictures would help the pros explain better.

 

I am trying to pull up the console So I can get the wires hidden in there some more and maybe bind the 4 wires going out to my lights under my seats together and have them come out on the driver side of my console hidden between the console and the seat. Please ask questions and all help I am very appreciative of b/c I am not really sure how to work on this. I right now have a very makeshift set up to hold me over till I figure out how to pull up my center console.

 

Ok just to make clear what I am confused on is how to get my center armrest up b/c I have to reason atm to bring up the radio part. If you look at my controller that I can trying to do is run the positive and negative through the spot between my seat and armrest up drill a hole in the bottom and hide most of the postivie and negaive wires that I have in my armrest underneath it. Also if you think I am doing this the wrong way all together tell me the kit i am installing is
http://www.ledunderbody.com/4pc7colo...teriorkit.aspx