Just installed 06 hlps, Taillights, fogs,city lights NOT WORKING
Joined: Apr 2004
Posts: 1,120
Likes: 0
From: Chase District NC
Just installed 06 hlps; Taillights,fog,city lights NOT WORKING
Just installed my 06 projectors and the sunroof, fog lights,tail lights and city lights not working...Any help out there..Checked all my fuses and two of them have no power on either side..It is the two 10amp fuses on the forward side if the fuse puller...My car is an 05...Thanks Derick OH YEA THE PROJECTORS AND SIGNALS WORK..BUT the signals in the bumper dont!
Last edited by wreckeds2k; May 31, 2006 at 04:44 PM.
Joined: Apr 2004
Posts: 1,120
Likes: 0
From: Chase District NC
As much as I work on these
As much as I work on these you think I would have remembered that.!!!!
I pulled the cowl screen off and boom! there it was..3 blown fuses..My sunroof still doesnt cooperate. Hit the button and there is nothing there. At first it would just go back but I wound it forward and then it just goes up/down..You have to keep hitting the switch. Now its stuck up. Thanks Ivory GT and everybody else..
I pulled the cowl screen off and boom! there it was..3 blown fuses..My sunroof still doesnt cooperate. Hit the button and there is nothing there. At first it would just go back but I wound it forward and then it just goes up/down..You have to keep hitting the switch. Now its stuck up. Thanks Ivory GT and everybody else..
I can't imagine the 06 did this to your car, all the circuit and load should be the same. There could be a short somewhere that's causing this. I experience the same problem only because I installed the Quad projectors and 2 extra ballasts draws extra current initally and so I changed the 10A to 15A and everything is fine now.
Trending Topics
Originally Posted by wreckeds2k
Which fuse did you upgrade?
My car was in an accident and the body shop is installing the 06 headlights for me as well. If they get done anytime soon I will let you know if they did anything different.
Keep us updated as well.
Joined: Apr 2004
Posts: 1,120
Likes: 0
From: Chase District NC
everything is working now..My car was in a wreck and the complete pass. side wiring harness was cut in half..I soldered and heatshrinked everything back to normal. I had blown fuses that were under the cowl screen fuse box. The sunroof still didnt work but I turned switch off/then on, hit button up 6times turn switch off/then on, hit up 6x; same procedure 3 times.. Then hit down button switch off/then on and everything works fine.
Sounds like big process.. But not too bad. Thanks again for the help and questions. Derick
Sounds like big process.. But not too bad. Thanks again for the help and questions. Derick
Thread
Thread Starter
Forum
Replies
Last Post
Micale757
Lighting
6
Apr 8, 2020 10:46 AM



