Search failed. help me out guys... I'd like to have my blinker in my 06 headlight work like the one in the 03-05.. Meaning, i'd like it to be on constant and blink when i turn. can someone help me out. Thanks

otit~

 

You need a 7443 bulb and connector, you can cut if off your 03-05 lights and then trim the base so it will snap into the base of turn signal. Then you need to tap into the city/clearance light line. I'm planning on doing this with my 06's when I get around to modding them.

 

thanks hai'.. this whole headlight thing is taking longer than i thought... too many things i want to do to it..

 

just one question though what about if you have a 06 already and you want the same thing with the yellow lights on, how will you be able to do it with out the 05 lights with you? thanks if you can reply

 

see if you can find a pair of connectors on ebay or something, not sure of anywhere you can purchase them seperately, but I haven't really looked into it

 

How are the 06 projectors normally? The yellow circle light is usually off until you signal?

 

^^^yes.

 

thanks for the help redlude97, but i didnt find anything. i guess i goota keep lookin

 

Which part do you need exactly? I have a boatload of wiring harnesses for the 03-05 lights.

 

these are the pieces i guess i need to get but i couldnt find them anywhere on ebay i started to think if it was even a posiblity for me get it from the dealership but it doesnt seem likely, if you have any of these parts it will help me out so much

 

I'm going to check with the dealer. I'm pretty sure they have it.. I can always cut the one from my 04 lights.. but i want to sell them complete

 

thanks for the help

 

just checked with infiniti.. they would only sell the whole wiring harness and controler... 500+

 

yeah lol i already tried when i went to get my brake pads last week

 

so i just cut the two wires from the old harness and connect them to the new harness and then i am done? but the 06 harness turn signal looks as the 03 harness they are just two wires.

B/c i was think is to take the two wires from the sidemaker and tap the singal in to it b/c it is on all the time and when i signal it signals b/c i didn't the blinking like mod for the side markers