OEM Fog lights info ???
Joined: Mar 2007
Posts: 292
Likes: 0
From: Jacksonville, FL
OEM Fog lights info ???
Hello all,
I read on the manual that the stock fog bulbs are rated at 55W. Now, is this what they draw? Or does this number symbolize the light output? The reason I ask is that I recently purchased a set of yellow Luminics rated at 55W but the output is 130W. I know many peeps are running these fogs, but I don't know if such a high output wattage could cause issues - I noticed my light housing gets warm around the fog light area with the new bulb, however, I never bothered to check with the stockers so I don't know if it's normal. I know that if the draw wattage is higher than stock, then it could cause the harness to burn, however, these draw 55W just like stock.
Any input would greatly help. I tried searching the forums but nothing answered my question.
Thank you,
Etien
I read on the manual that the stock fog bulbs are rated at 55W. Now, is this what they draw? Or does this number symbolize the light output? The reason I ask is that I recently purchased a set of yellow Luminics rated at 55W but the output is 130W. I know many peeps are running these fogs, but I don't know if such a high output wattage could cause issues - I noticed my light housing gets warm around the fog light area with the new bulb, however, I never bothered to check with the stockers so I don't know if it's normal. I know that if the draw wattage is higher than stock, then it could cause the harness to burn, however, these draw 55W just like stock.
Any input would greatly help. I tried searching the forums but nothing answered my question.
Thank you,
Etien
In your case the draw is 55W and it give the equivilent of 130W output.....
You should be fine with that setup. I wouldn't go any higher on the first number.....or you could run into harness problems caused by the higher draw.
You should be fine with that setup. I wouldn't go any higher on the first number.....or you could run into harness problems caused by the higher draw.
Joined: Mar 2007
Posts: 292
Likes: 0
From: Jacksonville, FL
Thanks guys, that's what I thought. Anyone knows what the output wattage of the OEM bulbs is? The output of the Luminics is 130W and I just wanna make sure they don't melt anything if I'm going much higher than stock. Thanks again! 
Also, does the stock OEM fog light make the light housing a little hot? I never bothered to check, and now that I have the Luminics and I checked and it does get warm/somewhat hot.
Etien

Also, does the stock OEM fog light make the light housing a little hot? I never bothered to check, and now that I have the Luminics and I checked and it does get warm/somewhat hot.
Etien
Last edited by 07BlackG35Stud; Jan 10, 2008 at 10:05 AM.
Joined: Mar 2007
Posts: 292
Likes: 0
From: Jacksonville, FL
Originally Posted by GR8TG35
In your case the draw is 55W and it give the equivilent of 130W output.....
You should be fine with that setup. I wouldn't go any higher on the first number.....or you could run into harness problems caused by the higher draw.
You should be fine with that setup. I wouldn't go any higher on the first number.....or you could run into harness problems caused by the higher draw.
The "output" they claim is BS. It is nowhere near 130w, its just marketing but its impossible for them to put out that much light, I would even go as far as to say they put out less light than stock becuase of the colored filter
Thread
Thread Starter
Forum
Replies
Last Post




