Please Help - Need HID Fog Kit for 07 G35 Sedan
Joined: Jul 2005
Posts: 1,572
Likes: 3
From: Westminster, MD
Please Help - Need HID Fog Kit for 07 G35 Sedan
All - I've been looking for a nice HID kit to replace my crapy fog lights that come on the 2007 G35 Sedan/Sport. OEMs are the HB4's, or 9006 as seen elsewhere. Either in the 2500k-3k range or 6k range to match Phillips Ultinon HIDs. Also might be open to just changing out the bulbs. I did buy the PIAA IONs which sucked! Don't mind spending some $$$ to get a nice look/performance. I've heard of the HELIOS, Bellof, Prolumen, McCULLOCH, Philips, Hella, Osram, Matsu****a, MTEC just to name a few. Any ideas for what I'm looking for? Please help locate some choices and places to buy! Many Thanks!!!
I did a custom job with IvoryGT on this forum to convert my '06 lights into quad HID projectors.
Here's a link to the build:
https://g35driver.com/forums/questionable-posts/174403-06-quad-projector-tl-zkw.html
Good Luck!
Here's a link to the build:
https://g35driver.com/forums/questionable-posts/174403-06-quad-projector-tl-zkw.html
Good Luck!
Joined: Jul 2005
Posts: 1,572
Likes: 3
From: Westminster, MD
Originally Posted by shibal_z
I did a custom job with IvoryGT on this forum to convert my '06 lights into quad HID projectors.
Here's a link to the build:
https://g35driver.com/forums/showthread.php?t=174403
Good Luck!
Here's a link to the build:
https://g35driver.com/forums/showthread.php?t=174403
Good Luck!
Joined: Jul 2005
Posts: 1,572
Likes: 3
From: Westminster, MD
Originally Posted by redlude97
Do NOT install an HID kit into your foglights. It will cause excessive glare for other drivers and make you a douchebag
Originally Posted by kmuniz78
Interesting. So even though I all ready have HIDs in there, if I were to replace the fogs, which are also housed in the headlight unit, there would be "excessive glare." Why is that?
Trending Topics
Originally Posted by ratm68
If i remember correctly, the fog is in a different section of the headlight. That housing might not be built to reflect HID output. Any differentiation in the way the bulb slides into the house and sit, can create glare as the unit should have some sort of cover/shielf to reduce glare. This shield is only built to shield glare from a 9006 bulbs.
Thread
Thread Starter
Forum
Replies
Last Post
laksjd84
Exterior - Body Parts
1
Jul 24, 2015 05:12 PM
netcbc
Steering & Suspension CDN
0
Jul 24, 2015 11:25 AM




