Im planning to paint my tail lights at my shop with the super shiny gloss black. Im going to do it next week but I was wondering on how to open the tail lights. I had to bake my head lights but do I have to do the same for the tails? Iv'e tried searching but threads that showed some people painting their tails showed up. If baking it, shouldnt be a problem for me. If cutting, I will have someone else do it for me as I am not good at being steady (i tend to twitch a lot). Also if cutting, what kind of glue should i use to reseal?

 

no way to bake 'em.
HAVE to cut 'em.

 

awww. what should i use to reseal? also, anyone the bay area wanna help me out cutting my tails for me ?

 

Yep, you gotta cut em open. You can use epoxy to reseal them. I used a loctite 5 min epoxy and its worked great for the better part of 2 years now.

 

Someone should do a write up on these

 

they have to be cut..i wrote a write up..ill try an find the link..but IMO its better to get overlays,they also make lense paint

 

https://g35driver.com/forums/interio...ot-lenses.html
pics arent there anymore but the write up is there dremel tool works best for cutting but the reseal is the hard part

 

you can also use 3m plastic weld epoxy

 

IrockAg35 you suck for no pictures.