My dome light on/off switch works but the dome light door switch option does not work at all. My side door light works when doors open. Just no the dome light, what might yall think it could be. Its driving me nuts!

 

It could be that you need to clean out the connection in the switch that tells the ecu that the door is open. It's the switch covered in rubber in your door jamb.

 

my door step light works so i know the switches are working

 

Sounds like the actual dome switch , if it were almost anything else the courtesy lights wouldnt work either .

 

I replaced the whole dome light assembly yesterday. same results

 

same thing happened to mine. i was changing to led and then my dome wouldn't come on at all. i disconnected the neg battery terminal, replace the bulbs back to stock. no the dome light will work when i push it, but not wen i open the door. every light works inside the car, even the courtesy light under the door.. the only one that doesn't work is the dome, when i open the door or take out the key.

i heard it might be the BCM, but all the other lights work. for 700+ to replace the bcm, i might just live with the problem. but if anyone has any other suggestions, im open

 

maybe you have the bulbs in the wrong way?? try flippin it around

 

Hey, did you ever get to fix your issue with the dome lights??? Im having the same problem. HELP..

 

uhh junk yard?!

 

I'm having the same issue as well. Just replaced all the interior lights with LED's and now the passenger dome light does not come on when I open the door. Thought it was maybe a bulb issue so i switched the driver and passenger side but that didn't help. I can live with it but it would be nice if they both came on...It seems like a fairly common issue, someone should have a fix.

 

I have a question, I'm hoping its not my bcm. When I open my doors, my dome lights doesn't turn on, neither do the puddles. But I can manually turn them on. Any ideas?

 

Sounds like a BCM problem? Try changing the bulbs to the stock ones and see if the problem persists. LED's use less power than bulbs so it might confuse the BCM.

 

Ill do that. I just need to buy some bulbs. Anyone else have any ideas?