too many headlights
#17
Originally Posted by E_K
It won't have the bezel or wiring harness, but I can include the low beam reflector, the high beam reflector, the metal bracket, the back dust covers and the H4, and the outer lens. How about $45 shipped in the US?
ok what is a bezel or wiring harness? and umm if i have a single projector to try out am i able to do this? i was wondering becuase if i was successful then i will do the drivers side also
#19
Originally Posted by mhschief806
I'd say i'm first in line?
ok what is a bezel or wiring harness? and umm if i have a single projector to try out am i able to do this? i was wondering becuase if i was successful then i will do the drivers side also
ok what is a bezel or wiring harness? and umm if i have a single projector to try out am i able to do this? i was wondering becuase if i was successful then i will do the drivers side also
The wiring harness is the group of wires in the back of the headlight which supplies the power for the HID, the H4, the signal, the clearance strips. I need the wires for my retrofit wiring.
The bezel is the plastic chrome piece that you see in front of the reflectors.
PM me if you're serious about buying one of the lights.
Unfortunately I can't take on any commitments for any retrofits for anyone. Work's going to get busy in the next few weeks, and the amount of time and labor needed for a quad projector setup is crazy. Littodevil on hidforum I think charges $2500 for quad projectors. Even that seems a little low to me, based on the time and the projectors (TLs, S2000s, TSX's) involved.
#20
Registered User
iTrader: (1)
Join Date: Jul 2005
Location: Los Angeles
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
OK, I have to say they are nice!!! But at the cost of just getting the '06 to bolt on, which I think is $1200 for the set is the work/cost of a retrofit really justifyable? I'm just wondering, don't get me wrong.
On a side note, I'm just looking to upgrade my '05 light bulbs. Can anyone give me some suggestions? What I'd like to do is get a brighter xenon bulb for the headlights, get a brighter bulb for the fogs (Sylvania Cool Blue or Silverstars any good?), and mabye a brigher bulb for the corner light (the long slit one). If you do suggest something, could you please give me detailed info., like model numbers and where to get them? Thanks.
On a side note, I'm just looking to upgrade my '05 light bulbs. Can anyone give me some suggestions? What I'd like to do is get a brighter xenon bulb for the headlights, get a brighter bulb for the fogs (Sylvania Cool Blue or Silverstars any good?), and mabye a brigher bulb for the corner light (the long slit one). If you do suggest something, could you please give me detailed info., like model numbers and where to get them? Thanks.
#21
You can get 06 projectors for even cheaper than $1200. More like $580. But in terms of retrofit vs 06 lights, it depends on what you're looking for. If you just want projectors, get the 06 lights. But if you're into clear lenses, washer mods, hybrid projectors, quad projectors, then you'll want a retrofit to get exactly what you want. Most people wouldn't care about the stuff in the previous sentence, but if you do, then you'll have to retrofit, or open up your 06 lights.
You can do a retrofit for $150 worth of material. That's not expensive.
You can do a retrofit for $150 worth of material. That's not expensive.
#22
Registered User
iTrader: (1)
Join Date: Jul 2005
Location: Los Angeles
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by E_K
You can get 06 projectors for even cheaper than $1200. More like $580. But in terms of retrofit vs 06 lights, it depends on what you're looking for. If you just want projectors, get the 06 lights. But if you're into clear lenses, washer mods, hybrid projectors, quad projectors, then you'll want a retrofit to get exactly what you want. Most people wouldn't care about the stuff in the previous sentence, but if you do, then you'll have to retrofit, or open up your 06 lights.
You can do a retrofit for $150 worth of material. That's not expensive.
You can do a retrofit for $150 worth of material. That's not expensive.
#23
www.ebay.com
look up 2006 headlights g35
look at the very bottom
there is a set for 580 buy it now.
seller is infinitispecialist
and they are on NATIONAL backorder.
look up 2006 headlights g35
look at the very bottom
there is a set for 580 buy it now.
seller is infinitispecialist
and they are on NATIONAL backorder.
#24
Registered User
iTrader: (1)
Join Date: Jul 2005
Location: Los Angeles
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by mhschief806
www.ebay.com
look up 2006 headlights g35
look at the very bottom
there is a set for 580 buy it now.
seller is infinitispecialist
and they are on NATIONAL backorder.
look up 2006 headlights g35
look at the very bottom
there is a set for 580 buy it now.
seller is infinitispecialist
and they are on NATIONAL backorder.
Oh OK, that price is for the light assembly only. No bulbs, etc. I've seen the entire '06 light assembly package (bulb included) for $1200. Which will make everything a simple bolt on replacement deal. I'm really wondering if it will be worth it. But sure would be nice to have projector HID's again.
#25
Originally Posted by E_K
The wiring harness is the group of wires in the back of the headlight which supplies the power for the HID, the H4, the signal, the clearance strips. I need the wires for my retrofit wiring.
The bezel is the plastic chrome piece that you see in front of the reflectors.
PM me if you're serious about buying one of the lights.
Unfortunately I can't take on any commitments for any retrofits for anyone. Work's going to get busy in the next few weeks, and the amount of time and labor needed for a quad projector setup is crazy. Littodevil on hidforum I think charges $2500 for quad projectors. Even that seems a little low to me, based on the time and the projectors (TLs, S2000s, TSX's) involved.
The bezel is the plastic chrome piece that you see in front of the reflectors.
PM me if you're serious about buying one of the lights.
Unfortunately I can't take on any commitments for any retrofits for anyone. Work's going to get busy in the next few weeks, and the amount of time and labor needed for a quad projector setup is crazy. Littodevil on hidforum I think charges $2500 for quad projectors. Even that seems a little low to me, based on the time and the projectors (TLs, S2000s, TSX's) involved.
Part one... http://www.nsxprime.com/forums/showthread.php?t=64134
Part two... http://www.nsxprime.com/forums/showthread.php?t=64133
And good job ont he lights EK
Oh and just posted this for the accord owners: http://www.v6performance.net/forums/...ad.php?t=67589
Ack wait.. here's another quad projector setup for your viewing enjoyment... some outputs on the second page.. never finished the write up though..
http://www.v6performance.net/forums/...ad.php?t=63581
Last but not least.. to stay on topic.. here's a previous collection of my headlights... eek.. lol spent a whole afternoon taking them apart xP...
Oh and after joining this forum and reading around.. thanks for mentioning my name here and there really appreciate it!
Best Regards,
Larry
#26
duuuude your awsome!! dang so many lights ahh how much money do you spend just buying headlight unites alone just for there projectors and lenses? the NSX headlights came out awsome the cutoff point on them is really sharp, i want to learn more abou this but i get lost in all the words..great work.
#27
Good to see you around, Larry (littodevil), and excellent work as usual. It's cause of your influence that I went with a quad projector setup of my own with 4 stanley projectors. https://g35driver.com/forums/g35-coupe-v35-2003-07/80078-tsx-tl-quad-projector-retrofit-installed-will-update-better-pics-future.html
If you ever are successful in modding those Matsu****a ballasts let me know....
You look just like this lawyer friend of mine in LA.
If you ever are successful in modding those Matsu****a ballasts let me know....
You look just like this lawyer friend of mine in LA.
#28
Multi-Spoked Mod
iTrader: (3)
Join Date: Oct 2002
Location: Ca, USA, Torrance
Posts: 3,360
Likes: 0
Received 0 Likes
on
0 Posts
Hey Larry,
Nice to see you on the forums....
check out my thread: https://g35driver.com/forums/lighting/83133-projector-retrofit-went-wrong-sigh.html
get any of my emails???
Ed Lin
Nice to see you on the forums....
check out my thread: https://g35driver.com/forums/lighting/83133-projector-retrofit-went-wrong-sigh.html
get any of my emails???
Ed Lin
Thread
Thread Starter
Forum
Replies
Last Post