WTT[NorWest]: 6-projector project for oem projectors
Thread Starter
|
Registered User
Joined: Jul 2015
Posts: 311
Likes: 23
6-projector project for oem projectors
Wanting to trade my 6-projector project for MINT OEM projectors.
Reason I'm selling is I don't think I'll ever have time to finish them. I've been slowly working on it since February whenever I get a chance. I have decided I'd just rather get OEM projectors and finish the many other projects on this car first before I attempt lighting again. The setup is functional, but needs finished. I've been driving with it for a couple weeks now with no problems. I am adding my oem rep halogen housings so you wont be left without headlights while working on the setup.
Parts included are:
4 Morimoto Mini D2S Square projectors
4 Morimoto XSB switchback halo's (Square 170mm)
2 Morimoto XSB switchback halo's (Round 70mm)
2 Morimoto XSB switchback LED strip's (6")
2 Morimoto XChange Drivers
4 Morimoto Gatling gun 2.0 shrouds
2 Ebay 2.5" projectors with Morimoto Lenses and shrouds
2 Crystal clear like-new lenses installed
2 OEM rep halogen housings painted matte black with worn lenses
There's probably more I can't think of at the moment
HID's NOT included.
I will also throw in any and all parts I can find relating to the headlights (shrouds, wiring, oem reflectors, etc...)
At this time I would prefer local pickup. Be that as it may, I do live in the middle of nowhere so I might consider shipping, but that would leave me without headlights, and prone to being ripped off. We can talk about it. I may also consider selling, but don't low-ball me. I'm knowingly taking a financial loss either way, but there's about a grand in parts alone wrapped up in this bundle.
Located in Lewiston, ID
Email me at moparnumber1@yahoo.com for faster response.
Reason I'm selling is I don't think I'll ever have time to finish them. I've been slowly working on it since February whenever I get a chance. I have decided I'd just rather get OEM projectors and finish the many other projects on this car first before I attempt lighting again. The setup is functional, but needs finished. I've been driving with it for a couple weeks now with no problems. I am adding my oem rep halogen housings so you wont be left without headlights while working on the setup.
Parts included are:
4 Morimoto Mini D2S Square projectors
4 Morimoto XSB switchback halo's (Square 170mm)
2 Morimoto XSB switchback halo's (Round 70mm)
2 Morimoto XSB switchback LED strip's (6")
2 Morimoto XChange Drivers
4 Morimoto Gatling gun 2.0 shrouds
2 Ebay 2.5" projectors with Morimoto Lenses and shrouds
2 Crystal clear like-new lenses installed
2 OEM rep halogen housings painted matte black with worn lenses
There's probably more I can't think of at the moment
HID's NOT included.
I will also throw in any and all parts I can find relating to the headlights (shrouds, wiring, oem reflectors, etc...)
At this time I would prefer local pickup. Be that as it may, I do live in the middle of nowhere so I might consider shipping, but that would leave me without headlights, and prone to being ripped off. We can talk about it. I may also consider selling, but don't low-ball me. I'm knowingly taking a financial loss either way, but there's about a grand in parts alone wrapped up in this bundle.
Located in Lewiston, ID
Email me at moparnumber1@yahoo.com for faster response.
Thread Starter
|
Registered User
Joined: Jul 2015
Posts: 311
Likes: 23
what do you mean by hid cap problem? i used the oem hid ballast for high beam (quicker warmup) and the oem caps are drilled to feed the AMP wires for aftermarket HIDs. the housings can still be sealed if thats what you are asking. it was def a cool project but i really dont have time for it unless i win the lottery lol. i still need to finish my tablet install to make it look clean and the rear spoiler needs painted as well. too many half-finished projects lol.
Thread
Thread Starter
Forum
Replies
Last Post
edwinisdumb15
SOCAL Meetings & Events
10
Sep 2, 2016 03:31 PM
