IPDM,BCM,Ignition and key, ECU
Thread Starter
|
Registered User
Joined: Sep 2014
Posts: 6
Likes: 0
IPDM,BCM,Ignition and key, ECU
Hey guys I bought a car and it was already stripped down. The car runs and drive with no problem. The problem is the front head lights, brake lights, windshield wiper, windows, door locks do not work. I ran a diagnostics and came back with error codes U1212 and U1001. I placed all new fuses in the IPDM and BCM and still no luck.
The interior light works, the hazard lights work. the radio and AC works
I am considering purchasing the BCM, IPDM, ignition lock, and ECU from the same donor which is from a 2005 coupe. By me doing this will I have to program anything for car to start with no problem.
Or does anyone know what i may do information fix this issue..
I may note that the BCM and IPDM did get wet when the car was stripped down.
below is a pic of the car when I got it with water in the car
The interior light works, the hazard lights work. the radio and AC works
I am considering purchasing the BCM, IPDM, ignition lock, and ECU from the same donor which is from a 2005 coupe. By me doing this will I have to program anything for car to start with no problem.
Or does anyone know what i may do information fix this issue..
I may note that the BCM and IPDM did get wet when the car was stripped down.
below is a pic of the car when I got it with water in the car
Thread
Thread Starter
Forum
Replies
Last Post