All DG Diamond Graphite Coupes POST PICS!
The following users liked this post:
Shanes_G (05-29-2013)
Registered User
iTrader: (18)
Join Date: Sep 2007
Location: Auckland, New Zealand
Posts: 10,359
Received 1,939 Likes
on
1,249 Posts
collars are loose. its the lower bracket that won't budge. I set the car down on the coils with the lock ring off, hoping I drive and they loosen themselves. I sprayed some PB Blaster on there to let it soak overnight and hope that helps. Too late now to keep trying, had the PB soak for about 3 hours with no budging, maybe overnight will do it. if not, *** it, i'll drive without the lock ring locked and hope it does.
Registered User
iTrader: (18)
Join Date: Sep 2007
Location: Auckland, New Zealand
Posts: 10,359
Received 1,939 Likes
on
1,249 Posts
i think it was shane looking for the VIP/boso exhaust.
here's mine. not that long,
45 degree angle cut tip, and exhaust also angled upwards.
the chrome tips are actually 18" long I believe and continue into the rear bumper. I didn't want a short tip (12") because that section of the tip would have been ugly non polished tubing.
here it is at the shop I went just as he finished, so you can see why I choose the 18" tip instead of the 12" (it goes further in and remains chrome, instead of transitioning to unpolished ugliness)
here's mine. not that long,
45 degree angle cut tip, and exhaust also angled upwards.
the chrome tips are actually 18" long I believe and continue into the rear bumper. I didn't want a short tip (12") because that section of the tip would have been ugly non polished tubing.
here it is at the shop I went just as he finished, so you can see why I choose the 18" tip instead of the 12" (it goes further in and remains chrome, instead of transitioning to unpolished ugliness)
Registered User
iTrader: (18)
Join Date: Sep 2007
Location: Auckland, New Zealand
Posts: 10,359
Received 1,939 Likes
on
1,249 Posts
how crazy is too crazy. should i keep the torch on it for like 1 second? make a quick pass around the whole thing?