No one? I went into Radio shack and bought a few LED's, but they dont work when they are hooked up to a 9V battery.

 

That looks amazing.

I want to get them done as well. They would look amazing, as I have tinted the rest (skyline style)

- robi-k

07 G35 Skyline Edition

 

What are you testing them on? The stock LEDs from the G35 taillights will blow with a regular 12V power supply if hooked up directly.

Apologies to anyone who PMed me in the past few weeks. I had a family medical issue, so the G35 wasn't high priority since January.

 

very nice work!!

 

looks great

 

I just figured out the wiring to doing the dual rings. I re wired everything basically. I am almost done just need to put this tail light back together, then do the other side, then I will be all done. Takes a lot of time, but when you figure it out your so amazingly happy when both rings turn on then the turn signals work.

 

I finally got the tail light all up and running. This is just the test fitment. I did not do anything to fancy, because I just did not want to on my G. This is one of the rarest mods done on the lights/exterior of the G35 coupe. I just did a friction fit. The 3 middle bars are my blinkers along with the outer light. The dual rings are my brakes and the lights that are on when the headlights are on. Pretty sick. I could do something like E__K, but for my car I did not want to. Im about 20hrs in on this project as is. Not to bad.

So here you go tell me what you think!




BLINKERS

 

I finally got the tail light all up and running. This is just the test fitment. I did not do anything to fancy, because I just did not want to on my G. This is one of the rarest mods done on the lights/exterior of the G35 coupe. I just did a friction fit. The 3 middle bars are my blinkers along with the outer light. The dual rings are my brakes and the lights that are on when the headlights are on. Pretty sick. I could do something like E__K, but for my car I did not want to. Im about 20hrs in on this project as is. Not to bad.

So here you go tell me what you think!




BLINKERS

 

damn this looks really good! props

 

VERY ORIGINAL! Nicely done!

 

Thanks Guys. I can do the mod, but its not for everyone to do themselves. Also, is it showing up as a double post for everyone else?

 

It looks fantastic! I am pretty sure it isnt an easy mod, but is it possible to write out how and what procedures you took to do the dual rings!!!!

Cause I want to do them for mine as well. It would be greatly appreciated!

And yes, there is a double post as well.

Cheers,

 

I seriously want a pair of these... Any DIY if I send you my tails?

 

Um.... I dont really feel like doing a DIY, because if someone does F up their lights the blame goes to me. There is soldering involved, cutting open the tail lights, re wiring a set of rings, and a few other steps that I am over looking. I can preform the mod, and may be able to do about 2 sets a month, but know that for a set like E__K's there is probably 50-80 or more hrs of labor involved. Im in about 22 for one tail light, and im about to re assemble it. Therefore even though mine is not "as custom" as E__K's I am still in it probably 40hrs. If you want me to do your tail lights please PM me, I do not want to bend or break any kind of forum rules here. I have the other side apart now. If your in the middle of doing it yourself, you can PM me with any messages.

 

If I do do another set im thinking of doing the rings as the blinkers and the 3 center bars as the brakes. All will illuminate at all times, but the rings will blink when your using the direction.