yes about 7 mm of poke but rolling and a pull would flush it easily and you would have to stretch to avoid rubbing

 

im gonna need a roll and a slight pull. 235/40 all around.

 

19x9.5
275/35/19

 

Just bought these wheels from the forum classifieds...

20x8.5/+40 & 20x10.5/+54 w/ 255/35R20 & 295/30R20

Lowered on Z springs and they rub a little when I carry passengers or bike on the back. Need to get the fenders rolled soon.

More pictures here:
http://picasaweb.google.com/lh/photo...eat=directlink

 

a 10.5!!^ win

 

I wanna see 10.5 pushin low offset on a sedan with some good stretched tires

 

VERY NICE! Could you post more pics of your ride?

 

I like your set up I think I always liked these, I think I may have to make a switch.

 

SIMILAR TO WHAT I WAS THINKING OF DOING ...
WITH A DIFFERENT WHEEL..

WHAT DO YOU GUYS THINK :
19x10+35 REAR WHEELS ...
275/35/19 TIRES

19X8.5+35 FRONT WHEELS...
245/40/19 TIRES

WOULD THIS FIT WELL ??

 

with a roll and pull of the fenders and stretched tires yes definately so rear tires would have to be 255s or so!

 

20x10.5 +55

 

wont need a fender pull, just a flat roll.

19x10 +35 with a 255/35 and -1.8 camber will fit perfectly as long as the car has atleast a 1.5" drop.
-GP-

 

I just checked the Weld Site and they're +54's meant for an '05+ Mustang. Apparently the fronts are 9" actually and +40. Odd that the new Mustang needs that narrow of a fitment (and that they fit a G sedan so closely). Guess that's the new place to look...if only Mustang owners were Volk ****** like the coupe guys.

I'm not much for running extra camber for fitment since I enjoy actually having some contact patch if I'm paying this much for tires. I will probably downsize the tires a little since most 295 tires are north of $300 each (outside of these cheap Proxes4's) but I probably won't try putting something like a 265 on there since its kind of pointless to buy that much rim and then put something meant for an 9".

As for more pictures, you can see the FS ad from dznutz. He's dropped on Teins w/ a front coil cut out and had his fenders rolled flat:
https://g35driver.com/forums/20-inch...n-fitment.html



http://web.archive.org/web/200708131...d+Alloy+Chrome

 

Is that a CF front lip?! WHERE did you get that?!





18x9.5 +28 with a 265/35

Pretty sure it's one of the more agressive rear sedan fitments on the boards

EDITS:
1.) Sorry for the **** POOR photo quality. Was a quick snap on my phone from when we test fitted them. When I actually give the man his money (waiting on the government to actually deposit my moneys) I'll wash the car and take some hi-res photo's
2.) The car had JUST come down off the jack, so it hadn't settled yet in this pic. There's roughly 1.5 finger gap from the tire to the fener, if that. Mandatory fender rollage lol.

 

Im almost positive you cannot run staggered on sedans, without rolling the fenders... Mine are not staggered but i wanted them, did a lot of research and found the widest i could go is what i have, and thats not staggered, but tires are stretched to avoid rubbing...