trying to get more shoots done before i get the new wheels before they release Jan/Feb im keeping that a secret tho ill be doing 19x10.5 all around this time. thats the only hint im giving

Really why not a staggered setup? Same size tires F/R?

i cant get a 9.5 ^^ i can get a 9+15 or 10.5 with low offset... if i do 10.5 all around ill do same size and be able to rotate

But if you do a 10.5 up front with the same offset as the rear you'll need a smaller tire size so you can turn.

Lets say you run 10.5 + 1X out back. If you run the same offset up front a 245/35 won't fit (without a big pull or a lot of camber), so you'll need a 235/35. Stretch up front will be more than out back.

You can just get the 9.5 +15 and add a 5 or 10mm spacer to the front. You sure you can't get the 9.5 in a lower offset, +15 seems weak to be the lowest offered.

i cant get a 9.5 ^^^ only a 9 wide :/ and run like a 25mm spacer i guess and be -10.. i still have a while to figure everything out

Ask yourself are the wheels really that nice to run widths and offsets you really don't want to run. A 9" front with a 10.5" rear is going to yield uneven stretch. You don't want to run a 215 on the front, its too short, and a 225 on the front will be less stretched than a 245. Just tell us the wheels you are considering so we can convince you not to get them and give you an alternative.

Nice picture from the shoot I was in over the weekend

nice chris!

Lookin' good SNOOP!

well i finally got another set of coils for my sedan and went with BC coils again but went with the 12/10k spring rates ...

i should have them in about a week or two ..

also december 11th the great "greengoblin" will be at my house doing some slammered work on my sedan and helping me pull the fenders about 5-10mm or so and helping me get a sweet and better aggressive look and pokin hard and as low as i am now i want to try and lower the car about another .5-1"

thats about it for my updates OO and thanks Tim for the polished fluid caps ...

I only read a few words on the last sentence. (Green Gobblin will be at my house pokin hard lol

i cant wait till my new coils come in so i can slam the front more !! great picture Ashley !! cant wait to see the other ones !!



UPDATE


well i was going to get a BBK and ended up buying a full system for the trunk some JL 10w6's (2) 550watt amps (2) and a few other goodies !!! i got a temp box for now and a good friend of mine with a coupe will be helping me start building a full custom trunk !!!

i pick up everything tomorrow !!! its going to slam when I'm done and look sick

maybe Marcus will let us make a sedan "custom stereo" thread in here .. i know there is a custom one in the audio section but they are pretty much all coupes !

i would love to get some ideas what others have done in the trunk of their sedans

^I know Vivek went through several custom setups

Stay tune for a whole new set up

Been working for hours today ..ill work on front tomorrow ..

I raised it up a bit. I still had a few threads left but no way.

Fender height was 23.5"out back and about. 5"and or less from fender to rim