g35snoop's 06 Sedan Progression Thread
#323
#325
SN00P is back
sorry i havent been around in a while been going thru a lot this but it never stopped me from modding the beast
here we go with all the new updates...
little over a month ago i started to tackle all the sueding myself... IMO it better to have a helping hand or to cause its not easy DIY
i went ahead and deleted all the " oh **** handles " and both passenger and Driver side Visors ... i did leave the big holder on pass side because its suck a huge gap and the suede started to wave in that area and plus there are (2) spots on the holder that hold the headliner up ..
Right after this i went and bought a NRG steering hub and NRG Gen.2.8 Quck Release and Grip Royal Steering wheel
Everything installed in the car...
Then shortly after this i KNEW it was time to start taking my engine to a whole new level so i went out and bought a complete VQ35 rev up engine and stripped it down Timing cover,VTC,pulley brackets,pulleys,valve covers,coolant hard pipes pretty much everything i need ....
i started hitting that polishing and if you want to do i have done all this by myself
NOE THE FUN begins !!! i started Taking the upper half of the engine out and time for the WIRE TUCK .... and had the battery covers shaved and ready for paint as well ...
i used this stuff called F6 Split Tech Flex used for harnesses .. can hold to 500 degrees or around that ...
i braided all the wires !! from 3/8" - 1" I also took 50+ pictures cause i will be making a DIY main wire tuck
Then i snagged a Unorthodox Racing ALT pulley
before
after
I Also started fixing my Power steering leak i had and why not re-polish the tank
Here is the final tuck done and engine put back together
Also here Are all the plastics all COLOR matched picking then up monday
Im no where NEAR done still have alot of stuff going for chroming and all the coolant hoses most deleted but the rest are all braided or slipped over braided wrap
Thanks everyone
sorry i havent been around in a while been going thru a lot this but it never stopped me from modding the beast
here we go with all the new updates...
little over a month ago i started to tackle all the sueding myself... IMO it better to have a helping hand or to cause its not easy DIY
i went ahead and deleted all the " oh **** handles " and both passenger and Driver side Visors ... i did leave the big holder on pass side because its suck a huge gap and the suede started to wave in that area and plus there are (2) spots on the holder that hold the headliner up ..
Right after this i went and bought a NRG steering hub and NRG Gen.2.8 Quck Release and Grip Royal Steering wheel
Everything installed in the car...
Then shortly after this i KNEW it was time to start taking my engine to a whole new level so i went out and bought a complete VQ35 rev up engine and stripped it down Timing cover,VTC,pulley brackets,pulleys,valve covers,coolant hard pipes pretty much everything i need ....
i started hitting that polishing and if you want to do i have done all this by myself
NOE THE FUN begins !!! i started Taking the upper half of the engine out and time for the WIRE TUCK .... and had the battery covers shaved and ready for paint as well ...
i used this stuff called F6 Split Tech Flex used for harnesses .. can hold to 500 degrees or around that ...
i braided all the wires !! from 3/8" - 1" I also took 50+ pictures cause i will be making a DIY main wire tuck
Then i snagged a Unorthodox Racing ALT pulley
before
after
I Also started fixing my Power steering leak i had and why not re-polish the tank
Here is the final tuck done and engine put back together
Also here Are all the plastics all COLOR matched picking then up monday
Im no where NEAR done still have alot of stuff going for chroming and all the coolant hoses most deleted but the rest are all braided or slipped over braided wrap
Thanks everyone