A little DG progession thread...
Joined: Oct 2009
Posts: 5,163
Likes: 113
From: St. Louis, MO
Matzo Ball's progession thread...
I figured I jump on the bandwagon and would do one as well. Started modding in Oct 2009 (z tube and clear corners.) Of course there are many additional mods in planning. Need to space them out over time of course 
Only real stock pic I have. You can see the ride height an OEM 17's. Teaching the little man how to wash the car
Coupe 18s installed with 245/40s all around. Loved the wheels but wanted larger wheels. Going for the "raised on bags look."
HKS rear section, clear corners, Rev-Up air box and S-Techs installed and settling (sorry for small pic)
Coupe 18s Gone. OEM Rays mounted. Guess I am never happy
Finally....Nismo LMGT4s (JDM Rays center caps and Nismo valve stem caps en route)....Parts for retrofit headlights parts being shipped today. 10mm spacers going on tomorrw (rear). Now to get the lower sills painted and a new front end....in due time
Nismo Side Skirts, Wald front and rear lips, retrofit projectors, rear camber arms....and the LMs will swapped out next week.
Nismo front end and JLB Apollos....
Wow, need to make some updates!. Since last pics I have added the following
BC Type BR Coils
Stoptech F/R slotted rotors
APR 74mm studs
Zspeed aluminum undertray
and.....
finally snapped some pics of my VS-KFs. Burning black but the faces need alot of love (chips, etc), so I will pdc then in silver come spring. May relip them as well. Proper shoot coming in the next few weeks.
Specs;
19x8.5 +12 (w/ spacers)
19x9.5 +18 (w/ spacers)
Only real stock pic I have. You can see the ride height an OEM 17's. Teaching the little man how to wash the car
Coupe 18s installed with 245/40s all around. Loved the wheels but wanted larger wheels. Going for the "raised on bags look."
HKS rear section, clear corners, Rev-Up air box and S-Techs installed and settling (sorry for small pic)
Coupe 18s Gone. OEM Rays mounted. Guess I am never happy
Finally....Nismo LMGT4s (JDM Rays center caps and Nismo valve stem caps en route)....Parts for retrofit headlights parts being shipped today. 10mm spacers going on tomorrw (rear). Now to get the lower sills painted and a new front end....in due time
Nismo Side Skirts, Wald front and rear lips, retrofit projectors, rear camber arms....and the LMs will swapped out next week.
Nismo front end and JLB Apollos....
Wow, need to make some updates!. Since last pics I have added the following
BC Type BR Coils
Stoptech F/R slotted rotors
APR 74mm studs
Zspeed aluminum undertray
and.....
finally snapped some pics of my VS-KFs. Burning black but the faces need alot of love (chips, etc), so I will pdc then in silver come spring. May relip them as well. Proper shoot coming in the next few weeks.
Specs;
19x8.5 +12 (w/ spacers)
19x9.5 +18 (w/ spacers)
Last edited by Matzo Ball; Dec 28, 2011 at 10:10 PM.
Looks real nice man. I had an opportunity to buy a set of those Nismo wheels for a good deal, but i didn't want to rip off Marcus again ahahaha
Trending Topics
