Cory maybe I missed it but what are your widths and offsets? You should be fine up front based on where it is sitting, just need to pinch them flat and flare it slightly.

What is your fender to ground measurement, sittin' real low and I'm sure that is also contributing to the rubbing but nothing a little fender work can't fix.

 

what i did with mine was i took out all the screws and clips from each side and when i pinched the fenders i made it to were the fender liner sat inside of the pinch and pinched it a little harder to cause the whole finder liner to stay up and not ever be able to fall down ..

8.5/9.5 off-sets f - 35 r - 40 iirc

 

^ yes... i have to measure fender to ground but i think i need to tweak it a bit first.

 

...so that would make me...

 

superhellasunk!

 

Your offsets has to be at least under 30 to be semi aggressive. Once you do fender work your getting closer :-P

 

dang it, yeah its been way to cold even for the work in the garage

...thats it im supahella sunk, send me a sticker

 

Nah, that's herrasunk

 

 

i guess i'm only "kinda" until my coils come in.



but the itch to be low was getting to me so i picked up a set of nf210's off my friends Z to hold me over(2.2" all around is not a bad stance i think)

 

gonna try a new setup also after test fitting my 19x11 +25 rear on the front...

with my camber arms giving me more camber all around i'm gonna try some 19x11 +12 with a 235/35 on all 4 corners

 

^got any bigger pics? looks great.

 

Sorry posted that from my phone

 

Stock 18s with 25mm spacers all around. I got tired of the sunk look so this should do until I get new wheels. Volk GTS

 

when did you last get an alignment. Your rear doesnt look centered in the well (caster may be off).