CandlestickPark's Full Interior LED Swap - LEDmod.com Prototype
if you trust him, I trust him... let me know if you need a car btw, think light grey is possible?
Aaron (G SEDAN) has already volunteered. If it doesn't work out with Aaron I definitely get you in contact with him Mike.
Light grey, leave it up to you to make a tough request like that Mike, I'm surprised you didn't say black chrome
I'll check with him to see.
Light grey, leave it up to you to make a tough request like that Mike, I'm surprised you didn't say black chrome
I'll check with him to see.
^
+1, Mike would be the one to come up with a difficult color!
"Light Grey" would be almost impossible to get out of the center display (above the clock)
Even white would be very difficult.
My goal with mine is to do red and white. Red on the center display (relatively easy) and white most everywhere else, with maybe a little red here and there to tie everything in.
+1, Mike would be the one to come up with a difficult color!"Light Grey" would be almost impossible to get out of the center display (above the clock)
Even white would be very difficult.
My goal with mine is to do red and white. Red on the center display (relatively easy) and white most everywhere else, with maybe a little red here and there to tie everything in.
I would do blue, but you and John already have blue... that's one of the reason the car didnt go blue, Viet and Marty are/were already blue
If the car was black I'd ask for fuchsia... come to think of it, that might work here... I have other ideas for interior someday (maybe soon, but hopefully later)... grey would work with current idea, but now I'm think of some other things that fuchsia gauge/lights would work with...
^ +1, Mike would be the one to come up with a difficult color!
"Light Grey" would be almost impossible to get out of the center display (above the clock)
Even white would be very difficult.
My goal with mine is to do red and white. Red on the center display (relatively easy) and white most everywhere else, with maybe a little red here and there to tie everything in.
+1, Mike would be the one to come up with a difficult color!"Light Grey" would be almost impossible to get out of the center display (above the clock)
Even white would be very difficult.
My goal with mine is to do red and white. Red on the center display (relatively easy) and white most everywhere else, with maybe a little red here and there to tie everything in.
They have "UV" LEDs now. They emit light in and above the purple part of the spectrum, some kinda look like black lights... probably not the best idea to have those in a location you'll be staring at constantly though (like... IDK... the gauges )
)
Custom OEM gauge face has been digitized and the template is completed. Going to work with Sean to make any changes to it that I want (can't think of any at the moment).
