DVGs progression thread
#46
#48
#50
Thank you! I appreciate it!
Here is a video of v3 triton output
You may notice that when I leave the amber on for too long, the white comes on. This is by design, so that you can use it in a car where the turn signals are also the daytime running lights (eg. cobalt) If the amber is on for too long, it assumes that the light is in DRL mode so it changes to white
Dont mind the cat...or my breathing, I promise Im in shape. I set up 2 work light pointing straight at it to simulate sunlight.
Here are some pictures of the notch in the GT Spec mount
![](https://i.imgur.com/q4iUH.jpg)
Here is a video of v3 triton output
You may notice that when I leave the amber on for too long, the white comes on. This is by design, so that you can use it in a car where the turn signals are also the daytime running lights (eg. cobalt) If the amber is on for too long, it assumes that the light is in DRL mode so it changes to white
Dont mind the cat...or my breathing, I promise Im in shape. I set up 2 work light pointing straight at it to simulate sunlight.
Here are some pictures of the notch in the GT Spec mount
![](https://i.imgur.com/q4iUH.jpg)
![](https://i.imgur.com/obq6G.jpg)
#55
Coupe seats! With m45 headrests! Cant wait to get these in.
![](https://i.imgur.com/UJkx7Qe.jpg)
Also, was just playing around with some of the LED 3rd brake lights I built for my mazda3, dont know if anything will come of this. I am planning to buy some ebay headlights in the future and retrofit some good bixenon projectors into them, along with the nice DRL / turn signal shown above. Which would leave the high beam slot open for accent lighting if I wish.
![](https://i.imgur.com/hc9gWt1.jpg)
You can look at the LED bars I made here: http://mazda3revolution.com/forums/2...han-stock.html
![](https://i.imgur.com/UJkx7Qe.jpg)
Also, was just playing around with some of the LED 3rd brake lights I built for my mazda3, dont know if anything will come of this. I am planning to buy some ebay headlights in the future and retrofit some good bixenon projectors into them, along with the nice DRL / turn signal shown above. Which would leave the high beam slot open for accent lighting if I wish.
![](https://i.imgur.com/hc9gWt1.jpg)
You can look at the LED bars I made here: http://mazda3revolution.com/forums/2...han-stock.html
#59
These seats were actually in hamilton lol, a lot closer to you and 4DGS than they were to me, so I had to keep it on the down low until they were mine ![5091](https://g35driver.com/forums/images/smilies/action-smiley-029.gif)
There are another pair somewhere in ontario, but there is competition for them. You can see them on the fb page "Ontario Infiniti G and Nissan Z Cars"
![5091](https://g35driver.com/forums/images/smilies/action-smiley-029.gif)
There are another pair somewhere in ontario, but there is competition for them. You can see them on the fb page "Ontario Infiniti G and Nissan Z Cars"
The following users liked this post:
TunerMax (03-25-2013)