Media Share V36 Sedan 2007 +Sedan Pictures

S.O.S. - Signaled Out Sedan

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Apr 13, 2015 | 02:16 PM
  #61  
b-dRizZy's Avatar
Registered User
iTrader: (13)
Joined: May 2010
Posts: 1,748
Likes: 118
From: Downey, Ca
did you put 2step also
 
Reply
Old Apr 14, 2015 | 12:39 PM
  #62  
ttv36's Avatar
Thread Starter
|
Registered User
iTrader: (3)
Joined: Jul 2011
Posts: 221
Likes: 36
From: Houston
^ no but a rev limiter is set because the motor is in 'break in' period.

Twitter birds.
 
Reply
Old Apr 22, 2015 | 02:22 PM
  #63  
ttv36's Avatar
Thread Starter
|
Registered User
iTrader: (3)
Joined: Jul 2011
Posts: 221
Likes: 36
From: Houston
Bad news: My SCG-1 boost controller/wideband is malfunctioning so I had to remove it to RMA.
Good news: Got retuned off wastegate pressure. Made less WHP but gained about 40 WTQ until the wastegate cut in. This means motor is almost done breaking in!

Blue line is the last highest run, red line is today's last run.


My tuner took it for a road test:
 
Reply
Old Apr 29, 2015 | 01:42 AM
  #64  
thegreatkwijibo's Avatar
Registered User
Joined: Aug 2012
Posts: 1,486
Likes: 142
From: Highland, Texas
Follow up question: are you gonna put a 2-step in it?
 
Reply
Old Apr 30, 2015 | 12:55 PM
  #65  
ttv36's Avatar
Thread Starter
|
Registered User
iTrader: (3)
Joined: Jul 2011
Posts: 221
Likes: 36
From: Houston
^ I think that is an option if/when I go to a Haltech unit.

My GoPro came in and I took a few videos on the way to work today.

 
Reply
Old Apr 30, 2015 | 02:19 PM
  #66  
b-dRizZy's Avatar
Registered User
iTrader: (13)
Joined: May 2010
Posts: 1,748
Likes: 118
From: Downey, Ca
why would you switch to haltech after ?
more power
 
Reply
Old Apr 30, 2015 | 03:01 PM
  #67  
ttv36's Avatar
Thread Starter
|
Registered User
iTrader: (3)
Joined: Jul 2011
Posts: 221
Likes: 36
From: Houston
^ More control and different tuning method (Uprev is MAF based while Haltech is MAP based).
 
Reply
Old May 1, 2015 | 12:57 PM
  #68  
thegreatkwijibo's Avatar
Registered User
Joined: Aug 2012
Posts: 1,486
Likes: 142
From: Highland, Texas
That would be cool I always wanted to see a G sedan spitting flames.
 
Reply
Old May 1, 2015 | 03:06 PM
  #69  
ttv36's Avatar
Thread Starter
|
Registered User
iTrader: (3)
Joined: Jul 2011
Posts: 221
Likes: 36
From: Houston
^ My car has spit flames when doing a highway pull. I had pulled quite a bit far away from the 370z camera car though.

 
Reply
Old May 1, 2015 | 11:44 PM
  #70  
thegreatkwijibo's Avatar
Registered User
Joined: Aug 2012
Posts: 1,486
Likes: 142
From: Highland, Texas
^nice
 
Reply
Old May 4, 2015 | 10:50 AM
  #71  
ttv36's Avatar
Thread Starter
|
Registered User
iTrader: (3)
Joined: Jul 2011
Posts: 221
Likes: 36
From: Houston
Saturday morning I drove through a shoot my friend was doing and he was nice enough to take a few snaps.





Then in the afternoon I went to a friend's baby shower, of course he wanted to see how the car runs. We took it around the neighborhood but couldn't even get onto the highway because I broke the driver side axle turning onto the frontage road..





Luckily it happened early enough in the day that I was able to get the car towed to Jtran and they were able to get me back on the road the same day!
 
Reply
Old May 4, 2015 | 01:46 PM
  #72  
b-dRizZy's Avatar
Registered User
iTrader: (13)
Joined: May 2010
Posts: 1,748
Likes: 118
From: Downey, Ca
are you going to upgrade them also later on ?
or oems can handle the power
 
Reply
Old May 4, 2015 | 02:57 PM
  #73  
ttv36's Avatar
Thread Starter
|
Registered User
iTrader: (3)
Joined: Jul 2011
Posts: 221
Likes: 36
From: Houston
^ I have so many things to upgrade that the axles are on a lower priority right now. Maybe eventually, but they are 'cheaper' to replace than say the clutch or differential.
 
Reply
Old May 4, 2015 | 03:05 PM
  #74  
Hotdawwgman's Avatar
Registered User
iTrader: (19)
Joined: Feb 2008
Posts: 7,054
Likes: 124
From: SoCal/Chicago at Heart
Whoa! Sounds great!
 
Reply
Old May 11, 2015 | 01:45 PM
  #75  
ttv36's Avatar
Thread Starter
|
Registered User
iTrader: (3)
Joined: Jul 2011
Posts: 221
Likes: 36
From: Houston
Some pictures from Cars and Coffee last month. This was before I got my A/C condenser back from CSF, kids and mom were not happy this day!





On a side note, I got my Innovate SCG-1 back from warranty work and am scheduled to get the car retuned tomorrow. Here's goes the hope for decent high boost numbers!
 
Reply


You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 12:46 AM.