how to install the z tube?
#1
#2
Re: how to install the z tube?
The DIY here is missing pictures. There's a good DIY on 6mt.net. I intsalled mine this weekend. I found it easier to remove the phillips screws (by the air filter) using a 10mm screwbit, as the phillips part of those screws strips really easily. Just make sure it's on there tight, and the z tube is stretched all the way.
http://www.6mt.net/shop/350zintake.asp
Drew
2003 G35 Sedan 6MT / Black / Graphite / Prem / Aero
http://www.6mt.net/shop/350zintake.asp
Drew
2003 G35 Sedan 6MT / Black / Graphite / Prem / Aero
#4
Registered User
iTrader: (2)
Join Date: Oct 2003
Location: NJ
Posts: 3,590
Likes: 0
Received 0 Likes
on
0 Posts
Re: how to install the z tube?
It lacks the sound baffles that the stock G tube (?) does so you get more of a growl under 4K rpm than stock when you punch it. Some say it adds a couple of hp but I'm skeptical. To me it was worth $75 for the growl and it's an easy install.
2K4 G35x/Brilliant Silver/Graphite/Premium/Wood
Stillen Hi-Flow/ Z tube/ Ground Kit
2K4 G35x/Brilliant Silver/Graphite/Premium/Wood
Stillen Hi-Flow/ Z tube/ Ground Kit
#5
Re: how to install the z tube?
One correction, the growl is ABOVE 4k, below 3500 sounds stock. I did notice the slightest bit of power increase, the true change came when I added the Stillen Pop charger. (JWT makes a nice one as well.
The install is very easy, two clamps, and bolt and the MAS tube. One tip I will through out is to make sure you work your MAS tube back towards the firewall when postioning the Z-tube. Otherwise it will crease and limit the airflow to the sensor. The difference is that the 350 tube has the connector under the tube while the G tube has it above, so you end up with a few extra inches.
03 - Black - Premium - Wood - Aero w/ Spoiler - Z Tube - Grounded - Stillen CAI
The install is very easy, two clamps, and bolt and the MAS tube. One tip I will through out is to make sure you work your MAS tube back towards the firewall when postioning the Z-tube. Otherwise it will crease and limit the airflow to the sensor. The difference is that the 350 tube has the connector under the tube while the G tube has it above, so you end up with a few extra inches.
03 - Black - Premium - Wood - Aero w/ Spoiler - Z Tube - Grounded - Stillen CAI
#7
Re: how to install the z tube?
Bigger filter and better design to condition the air into the tube. The cone and the internal ring are angled so the air has a straighter path rather than the perpendicular stock filter walls. These are the 2 major ones. Search the tech mod section for more info.
http://www.stillen.com/Sportscars_de...d=23525&page=1
http://www.jimwolftechnology.com/cus...asp?PartID=444
03 - Black - Premium - Wood - Aero w/ Spoiler - Z Tube - Grounded - Stillen CAI
http://www.stillen.com/Sportscars_de...d=23525&page=1
http://www.jimwolftechnology.com/cus...asp?PartID=444
03 - Black - Premium - Wood - Aero w/ Spoiler - Z Tube - Grounded - Stillen CAI
Thread
Thread Starter
Forum
Replies
Last Post
johnadlertech
Accessories
6
09-01-2015 08:15 PM