^I do. I've taken mine off a few times. So many times I can do it with my eyes closed.

 

1.Hi-Tech_G
2.xjonmo (depending on when in March..I'll be out of Boston for half the month)
3.G-Fusion( i don't mind go and check out what part i plan for my soon to get a G)
4.Virtualbong (If I'm available, I'd want to come meet some of you fools).
5. M@rCo (Sounds like a great idea)
6. ZDriver12
7.
8.
9.

been wanting to install some clear reflectors on the Z, but wasnt confident in removing the whole bumper.

 

Nevermind. That is too far of a drive. This is a great idea though. Good luck with it guys!

-AGThing1227

 

1.Hi-Tech_G
2.xjonmo (depending on when in March..I'll be out of Boston for half the month)
3.G-Fusion( i don't mind go and check out what part i plan for my soon to get a G)
4.Virtualbong (If I'm available, I'd want to come meet some of you fools).
5. M@rCo (Sounds like a great idea)
6.PDubz
7.Str3ryderz
8.
9

 

so do we have a date for this?

 

Do you guys know how to remove the rear bumper? I'm looking to bring my rear back to stock...with that said, anyone interested in a Kenstyle Rear Bumper for stock plus cash? Its painted IP. Its not in new condition, so I won't ask for that much cash. PM me if you're interested.

 

So is this still going to happen?

I am looking to trade my Kenstyle Rear Bumper with a stock IP rear + some cash as well as looking for someone who would want to trade their stock catback + some cash for my Nvidia Catback. The tips are not the original tips. The dealership that I purchased the car from had to put new tips on because one of the tips were missing.

Let me know if anyone is interested, so that I can do all of this during this install meet. Thanks guys.

 

^This is still going to happen. I wanna try and shoot for the 1st or 2nd weekend in March. We still have to decide on a location though. PM me about the exhaust. I might have someone interested.

 

You should come to our club meets. This is exactly what we do. DIY work in at our club location. Meets are always open to guests to hang out. We're in West Berlin, NJ. 30 minutes from Philly.

https://g35driver.com/forums/northeast/202950-pfm-meet-sunday-february-24th.html

 

1.Hi-Tech_G
2.xjonmo (depending on when in March..I'll be out of Boston for half the month)
3.G-Fusion( i don't mind go and check out what part i plan for my soon to get a G)
4.Virtualbong (If I'm available, I'd want to come meet some of you fools).
5. M@rCo (Sounds like a great idea)
6.PDubz
7.Str3ryderz
8.Naughty240
9

Ill come check it out. My funds are on lock down but I dont mind helping. Remember sedans hold more beer.

 

I can only do this on the weekend of the 15th and the 29th..I'm gonna be in Cali

 

Can anyone have a place to help me install some lowering springs this Saturday? I just purchased some 350Z H-Techs and they should be coming in by Thursday or Friday. If someone has a place and the tools to help me out, that'd be great!

WIL

 

i did mine last week i could help you out a little later during the day since i gotta clean up my apartment first. i have tools too but no place to do it

 

How long did it take? Just springs right?

Whoever can offer up a location (inside would be nice since I think its supposed to rain on Saturday) I'll bring a case of Harpoon IPA or for those who like the Heineken, I could get that instead.

 

It shouldn't take more than a few hours, I only did springs too. I ran into some problems while doing mine cuz my friend stripped a nut and we couldn't get it off. Lucky for you I have the "bolt off" kit with me so we can fix that if it happens.

I'm kinda tight on time on Saturday but I'm down to help you out for a couple hours. I'll give you a list of stuff I don't have:

1. Good jack
2. Jackstands
3. Strut Spring Compressor (Free rental from Autozone)
4. Penetrating oil (Not completely necessary, but it helps)
5. Place to work

I'm pretty sure I got everything else..

btw...what every happened to this event?