Va Beach / Hampton Roads G owners?
#6856
Sorry about that. We will start working at 3:30. We will be removing tests pipes, y pipe, spacer, lowering springs and also switching the brembo's over to my car. PM me for my cell number and address if you would like to come over and help out. I just don't like putting my personal info on the internet for everyone to see
#6857
PM Brian_Brice. He's in Richmond and is the best detailer I've ever seen.
#6858
#6860
Quick question. I got my new used brembos on my car and i'm in the process of bleeding the brakes. I'm having problems getting pedal pressure. I can get it if i pump the brakes. I'm a doing something wrong? I'm thinking i still have alot of air in my lines. but when i bleeding them i don't seem to be getting any more air out. I have bleed the brakes 5 times so far. Any advice would be great.
#6863
Registered User
iTrader: (44)
Joined: Apr 2006
Posts: 3,038
Likes: 14
From: Chesapeake, VA/The Bronx, NY
All parts have 5000 miles unless noted.
*** = I can installed the parts on your car.
Greddy TT (TH05-18G's turbos) with upgraded SS oil press and return line. ...............Return lines had AN fitting that screw into the oil pan.Need new gaskets for Turbos to manifold.
Greddy intercooler
Greddy Type RS
$4400
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
HKS FCon VPro with 350Z/G35 wire hardness and Denso MAP sensor and IAT sensor-$1300
[IMG][/IMG]
***HKS CAMP2 with OBDII connector--$400
[IMG][/IMG]
***HKS CAMP2 I/F Unit with Oil temp, oil pressure, and Boost sensors--$300
[IMG][/IMG]
***HKS EVC VI---$600
[IMG][/IMG]
***HKS AFK (Wideband and Knock-amp) Dual wideband setup---$750
[IMG][/IMG]
***Deatschwerks Injectors 600cc (Just clean by RC eng $156)---$400
[IMG][/IMG]
[IMG][/IMG]
****Hotchkis Sway Bars (V2) (15K miles, not that it really matters)) ---SOLD
***GT SPEC Front Lower Tie Brace ---SOLD
***GT SPEC Rear Lower Tie Brace---SOLD
***New GT SPEC Rear Lateral Arm Brace---SOLD
***Stillen Front Strut Bar---SOLD
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
New Cosworth 96mm (0.020" over) Headgaskets
[IMG][/IMG]
[IMG][/IMG]
SAMCO Sport Red Silicone Coolant Hoses for the 350Z--$70
[IMG][/IMG]
OEM Nissan Pathfinder Rear Cooling Mod--$150[IMG][/IMG]
Glow-Shift 13-Row Oil Cooler Kit (with Hoses)---$200
[IMG][/IMG]
Mocal Oil Sandwich (With Thermostat)---$100
[IMG][/IMG]
Injected Performace Solid Motor Mounds---$100
[IMG][/IMG]
***GroundingGear 4-Wire Engine Grounding Kit---$20
[IMG][/IMG]
***AAM 3" True-Dual exhaust (for a 350Z, need to be extended a to fit a G35)---$700
[IMG][/IMG]
AAM 3" Downpipes with open wastegate dumps (One dump tube needs to be welder together)---$450
[IMG][/IMG]
AeroCatch Hood Lockable Latches---$80
[IMG][/IMG]
3" K&N filters---$20each
[IMG][/IMG]
Vibrant Vacuum block---$80
[IMG][/IMG]
ARP L19 Extreme Duty Head Studs---$200
***Walbro 255lph fuel pump--$80
*** = I can installed the parts on your car.
Greddy TT (TH05-18G's turbos) with upgraded SS oil press and return line. ...............Return lines had AN fitting that screw into the oil pan.Need new gaskets for Turbos to manifold.
Greddy intercooler
Greddy Type RS
$4400
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
HKS FCon VPro with 350Z/G35 wire hardness and Denso MAP sensor and IAT sensor-$1300
[IMG][/IMG]
***HKS CAMP2 with OBDII connector--$400
[IMG][/IMG]
***HKS CAMP2 I/F Unit with Oil temp, oil pressure, and Boost sensors--$300
[IMG][/IMG]
***HKS EVC VI---$600
[IMG][/IMG]
***HKS AFK (Wideband and Knock-amp) Dual wideband setup---$750
[IMG][/IMG]
***Deatschwerks Injectors 600cc (Just clean by RC eng $156)---$400
[IMG][/IMG]
[IMG][/IMG]
****Hotchkis Sway Bars (V2) (15K miles, not that it really matters)) ---SOLD
***GT SPEC Front Lower Tie Brace ---SOLD
***GT SPEC Rear Lower Tie Brace---SOLD
***New GT SPEC Rear Lateral Arm Brace---SOLD
***Stillen Front Strut Bar---SOLD
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
New Cosworth 96mm (0.020" over) Headgaskets
[IMG][/IMG]
[IMG][/IMG]
SAMCO Sport Red Silicone Coolant Hoses for the 350Z--$70
[IMG][/IMG]
OEM Nissan Pathfinder Rear Cooling Mod--$150[IMG][/IMG]
Glow-Shift 13-Row Oil Cooler Kit (with Hoses)---$200
[IMG][/IMG]
Mocal Oil Sandwich (With Thermostat)---$100
[IMG][/IMG]
Injected Performace Solid Motor Mounds---$100
[IMG][/IMG]
***GroundingGear 4-Wire Engine Grounding Kit---$20
[IMG][/IMG]
***AAM 3" True-Dual exhaust (for a 350Z, need to be extended a to fit a G35)---$700
[IMG][/IMG]
AAM 3" Downpipes with open wastegate dumps (One dump tube needs to be welder together)---$450
[IMG][/IMG]
AeroCatch Hood Lockable Latches---$80
[IMG][/IMG]
3" K&N filters---$20each
[IMG][/IMG]
Vibrant Vacuum block---$80
[IMG][/IMG]
ARP L19 Extreme Duty Head Studs---$200
***Walbro 255lph fuel pump--$80
Last edited by citymunky; 06-18-2011 at 10:44 AM.
#6864
Thanks for the info City. About 20 mins after posting i figured out what i was doing wrong. I forgot all about the inner bleeder. Yes i'm a dumbass. I'll be the first one to admit it when i screw up or do something wrong. But i tell you what the outer has had the **** bleed out of it. I'll finish it tonight after work and more then likely install my lower springs.
#6865
The Brembo install is complete and works well. Also got the lower springs installed last night and i can't wait for the springs to settle for i can exactly how much drop i'm going to get but i can already see the drop and it looks good. I took the car for a quick test drive last night and thinking about taking it for a nice drive tonight down to va beach
#6866
#6867
parts
citymunky
I will have cash and car ready friday if you can install them this friday at my place. I am heading out of town this weekend and would like to take these things with me.
***Hotchkis Sway Bars (V2) (15K miles, not that it really matters)) ---$250
***Stillen Front Strut Bar---$100
I will have cash and car ready friday if you can install them this friday at my place. I am heading out of town this weekend and would like to take these things with me.
***Hotchkis Sway Bars (V2) (15K miles, not that it really matters)) ---$250
***Stillen Front Strut Bar---$100