Hello my Brothers and Sisters-

I need to find a place to custom fabricate wire mesh inserts for my new bumper /grill. Anybody know of a place that does this ? Somebody said check out a sheet metal shop, but that doesn't sound right. Do body shops do this ? Prefer East Bay but mainly just want it done right . Thanks for any info.

PN

 

.


order one, theymake grills for your bumper. pm me i can get you one.

 

Don't go with the metal ones, they rust. I had some on a previous car and they only looked good for a few months and then had to be changed. Look for some like the customautomesh.com ones or similar.

 

not if you paint them.

 

You might want to ask Klumzyee. I'm getting his grill/mesh combo set up.
https://g35driver.com/forums/questionable-posts/156252-poly-urathane-front-grill-g35-coupe-w-mesh-210-00-shipped-intro-price.html


Maybe he can throw in a grill for you in my shipment.
They're being sent to Mike's shop and you could pick it up from there.

 

customautomesh.com see if they make it for your bumper. i know they have it for grills.

 

I'm getting that one too

As far as the mesh, he is using customautomesh so you might as well go to the source directly.

 

kinda sucks i spent 600 for my real gialla and all these nice knock offs come out.


i am using his grill for my nismo bumper. them buggers are sharp so watch out when you open the box i cut my hand pretty good.

 

OT(Sorry Paul): How did you attach the Mt Fuji? Is it one from the back trunk?

 

i am not paul but paul put a front one on his so it sticks out if you want the flush one like mine use a rear one

 

I used factory front Emblem which is pressure fit into the mesh spaces, just pull it off old grill, center it, and push real hard into new one.

Remounted trunk emblem (after black chrome painting) with indoor/outdoor carpet backing tape. Heavy duty 3M double sided tape is recommended on the forum, but I couldn't find it.

 

Thanks !! It's a TS knock-off, lot's of friggin big holes to mesh !!

 

lol! I should have said "Hey Kris"! I saw your pic on the link and was curious.
Now I'll have to look at both. (Thanks Paul)!

I don't think I'm going to have it done by the drive.
I have to make the decision on the sways and springs.
I going to do one big install so as not to take time from Mike's shop/customers.

 

'

i have some if you need it, or any body shop kragen has it too but you have to be lucky i went to like 4 to find it. and then i had to wait till their shipment cause all of them were out.

 

you getting it for the bottom holes too?

since you cant use your aftermarket grill you taking the grill off that one to put on the ts? i have a real gialla mesh if you need it, i went with another style cause of my nismo bumper mesh grill